Read Sony ICD-UX502 Service Manual online
ICD-UX502
13
4. OPERATION OF THE TEST MODE
4-1. VERSION
Model name, destination, fi rmware version, IPL2 version, CPU
version, initial language, charge function, card function, radio
function, eMMC maker code and eMMC capacity can be con-
fi rmed.
4-1. VERSION
Model name, destination, fi rmware version, IPL2 version, CPU
version, initial language, charge function, card function, radio
function, eMMC maker code and eMMC capacity can be con-
fi rmed.
Procedure:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
>
] or [
.
] keys to select the “VERSION”, and
press the [
N
/ENTER] key.
3. Model name, destination, fi rmware version, IPL2 version and
CPU version are displayed on page 1/2 of LCD display. Press
the [
the [
>
] or [
.
] keys, initial language, charge function,
card function, radio function, eMMC maker code and eMMC
capacity are displayed on page 2/2 of LCD display.
capacity are displayed on page 2/2 of LCD display.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<VERSION>
ICD-UX502/CE7
MAINFW:1.00.01
IPL2FW:1.00.00
LSI 4252
ICD-UX502/CE7
MAINFW:1.00.01
IPL2FW:1.00.00
LSI 4252
LCD Display (page 1/2)
<VERSION>
L:02 C0M0R0
eMMC MCode 15
eMMC Capa 02GB
L:02 C0M0R0
eMMC MCode 15
eMMC Capa 02GB
LCD of Display (page 2/2)
eMMC maker code
eMMC capacity
Model name/Destination
Firmware version
IPL2 version
IPL2 version
CPU version
Initial language
Charge function
Card function
Radio function
C/M/R : 1 = function exists
0 = function non-exists
Releasing method:
Press the [STOP/
Press the [STOP/
x
] key, return to test mode menu.
4-2. KEY CHECK
Operation of keys and switches can be checked, and this unit can
return to the factory shipment settings.
Operation of keys and switches can be checked, and this unit can
return to the factory shipment settings.
Note 1: It cannot move to other modes from this mode.
Procedure:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
>
] or [
.
] keys to select the “KEY CHECK”,
and press the [
N
/ENTER] key.
3. Whenever any keys of this unit are pressed or any switches of
this unit are slid, the button count decreases.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<KEY CHECK>
LCD Display
KEY:PREV
REMAIN: 15
REMAIN: 15
Button count
Confirmed key name
Target keys:
[STOP/
x
], [>], [.], [
N
/ENTER], [REC/PAUSE/
z
],
[
/
A-B], [ERASE], [VOL +], [VOL –], [MENU], [FOLDER],
[T-MARK],
[
v
], [
V
]
Target switches:
[DPC (SPEED CTRL)] (ON, OFF), [HOLD•POWER]
(“POWER” direction, return from “POWER” direction,
“HOLD” direction, return from “HOLD” direction)
(“POWER” direction, return from “POWER” direction,
“HOLD” direction, return from “HOLD” direction)
4. After all the keys and switches are decided, initialization is
performed.
5. “Success” is displayed, and this unit reboots.
Note 2: This unit is not initialized when “Failure” is displayed.
Releasing method:
Remove battery.
Remove battery.
Click on the first or last page to see other ICD-UX502 service manuals if exist.