Read Sony HCD-SHAKEX3 / HCD-SHAKEX7 Service Manual online
HCD-SHAKEX1/SHAKEX3/SHAKEX7
5
PLAYABLE DISCS
• DVD+R/DVD+RW
• AUDIO
• DVD+R/DVD+RW
• AUDIO
CD
• CD-R/CD-RW/DVD-R/DVD-RW
–
–
audio
data
–
MP3
fi les that conforms to ISO9660 Level 1/Level 2, or
Joliet (expansion format).
Notes
• MP3 (MPEG 1 Audio Layer-3) is a standard format defi ned
• MP3 (MPEG 1 Audio Layer-3) is a standard format defi ned
by ISO (International Organization for Standardization) which
compresses audio data. MP3 fi les must be in MPEG 1 Audio
Layer-3 format.
compresses audio data. MP3 fi les must be in MPEG 1 Audio
Layer-3 format.
• The system can only play back MP3 fi les that have a fi le
extension of “.mp3”.
NOTE OF REPLACING THE IC1008 AND IC1010 ON
THE 4CH DAMP BOARD
IC1008 and IC1010 on the 4CH DAMP board cannot exchange
with single. When these parts on the 4CH DAMP board are
damaged, exchange the entire mounted board.
THE 4CH DAMP BOARD
IC1008 and IC1010 on the 4CH DAMP board cannot exchange
with single. When these parts on the 4CH DAMP board are
damaged, exchange the entire mounted board.
NOTE OF REPLACING THE IC002, IC101, IC105, IC106,
IC301, IC302 AND IC303 ON THE MOTHERBOARD
BOARD
IC002, IC101, IC105, IC106, IC301, IC302 and IC303 on the
MOTHERBOARD board cannot exchange with single. When these
parts on the MOTHERBOARD board are damaged, exchange the
entire mounted board.
IC301, IC302 AND IC303 ON THE MOTHERBOARD
BOARD
IC002, IC101, IC105, IC106, IC301, IC302 and IC303 on the
MOTHERBOARD board cannot exchange with single. When these
parts on the MOTHERBOARD board are damaged, exchange the
entire mounted board.
NOTE OF REPLACEMENT OF THE MS-476 BOARD
When the MS-476 board is defective, exchange the entire
LOADING COMPLETE ASSY (T).
When the MS-476 board is defective, exchange the entire
LOADING COMPLETE ASSY (T).
[DISC TRAY LOCK MODE]
This mode let you lock the disc tray. When this mode is activated,
the disc tray will not open when [Z] button is pressed. The message
“LOCKED” will be displayed on the fl uorescent indicator tube.
This mode only applied when there is disc(s) on the tray.
This mode let you lock the disc tray. When this mode is activated,
the disc tray will not open when [Z] button is pressed. The message
“LOCKED” will be displayed on the fl uorescent indicator tube.
This mode only applied when there is disc(s) on the tray.
Procedure:
1. Press
[
\/1
] button to turn on the system.
2. Select DVD/CD function.
3. Press [DJ OFF] button and [ISOLATOR] button simultaneously
3. Press [DJ OFF] button and [ISOLATOR] button simultaneously
and hold down until “LOCKED” or “UNLOCKED” displayed
on the fl uorescent indicator tube (around 5 seconds).
on the fl uorescent indicator tube (around 5 seconds).
Note: When
“
LOCKED
”
is displayed, the slot lock is not released by
turning power on/off with the
[
\
/1
]
button.
NOTE OF REPLACING MOTHERBOARD BOARD OR
BLUETOOTH MODULE OR RC-S730 (WW) BOARD
When the MOTHERBOARD board or BLUETOOTH module
or RC-S730 (WW) board are replaced, please execute the below
service mode.
BLUETOOTH MODULE OR RC-S730 (WW) BOARD
When the MOTHERBOARD board or BLUETOOTH module
or RC-S730 (WW) board are replaced, please execute the below
service mode.
Pairing this system with a
Bluetooth device
1. Press the [
\
/1
] button to turn the power on.
2. Place
the
Bluetooth device within 1 meter from the system.
3. Press BLUETOOTH on the unit to select Bluetooth function.
“BLUETOOTH” appears in the display panel.
4. Hold down BLUETOOTH on the unit for 2 seconds or more.
“PAIRING”
“PAIRING”
fl ashes in the display panel.
5. Perform the pairing procedure on the Bluetooth device.
6. Select the model number of the unit on the display of the
6. Select the model number of the unit on the display of the
Bluetooth device.
For example, select “SONY:SHAKE-X1D or SHAKE-X3D or
SHAKE-X7D”.
SHAKE-X7D”.
If passkey is required on the Bluetooth device, enter “0000”.
7. Perform
the
Bluetooth connection on the Bluetooth device.
8. When pairing is completed and the Bluetooth connection is
established, Bluetooth device name appears in the display
panel.
panel.
9. To cancel pairing operation, hold down BLUETOOTH on the
unit for 2 seconds or more until “BLUETOOTH” appears in
the display panel.
the display panel.
Connecting with a smartphone by one touch (NFC)
Note: The operation in this mode must use a NFC-compatible smartphone
(Smartphones with a built-in NFC function [OS: Android 2.3.3 or
later, excluding Android 3.x])
later, excluding Android 3.x])
1. Press the [
\
/1
] button to turn the power on.
2. Download and install the app “NFC Easy Connect”.
Download the free Android app from Google Play by searching
for “NFC Easy Connect”.
for “NFC Easy Connect”.
3. Start the app “NFC Easy Connect” on the smartphone.
Make sure that the application screen is displayed.
4. Touch the smartphone to the N-Mark on the system until the
smartphone vibrates.
Complete the connection by following the instructions
displayed on the smartphone.
5. When pairing is completed and the Bluetooth connection is
established, the Bluetooth device name appears in the display
panel.
panel.
Ver. 1.1
Click on the first or last page to see other HCD-SHAKEX3 / HCD-SHAKEX7 service manuals if exist.