HCD-SHAKEX3, HCD-SHAKEX7 - Sony Audio Service Manual (repair manual). Page 2

Read Sony HCD-SHAKEX3 / HCD-SHAKEX7 Service Manual online

HCD-SHAKEX1/SHAKEX3/SHAKEX7
2
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS  IDENTIFIED  BY  MARK 
0 OR  DOTTED  LINE  
WITH  MARK 
0 ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS 
 
WHOSE  PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  
MANUAL  OR  IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
• Abbreviation
 AR  : 
Argentina 
model
 AUS : 
Australian 
model
 E4  : 
African 
model
  E12 
: 220 – 240 V AC area in E models
  EA 
: Saudi Arabia model
  LA9 
: Latin-American model
  MY 
: Malaysia model
  RU 
: Russian model
 TH  : 
Thai 
model
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, 
screws, and all other exposed metal parts for AC leakage. Check 
leakage as described below.
LEAKAGE  TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes).
Leakage current can be measured by any one of three methods.
1.  A commercial leakage tester, such as the Simpson 229 or RCA
 
WT-540A. Follow the manufacturers’ instructions to use these
 instruments.
2.  A battery-operated AC milliammeter. The Data Precision 245
 
digital multimeter is suitable for this job.
3.  Measuring the voltage drop across a resistor by means of a
 
VOM or battery-operated AC voltmeter. The “limit” indication
 
is 0.75 V, so analog meters must have an accurate low-voltage
 
scale. The Simpson 250 and Sanwa SH-63Trd are examples
 
of a passive VOM that is suitable. Nearly all battery operated
 
digital multimeters that have a 2V AC range are suitable. (See
 Fig. 
A)
1.5 k
Ω
0.15 
μF
AC
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Earth Ground
Fig. A.  Using an AC voltmeter to check AC leakage.
SHAKE-X3D only
•  Unit: HCD-SHAKEX3 (1)
•  Speaker system: SS-SHAKEX3 (2)
•  AC power cord (mains lead) (1)
•   AC plug adaptor (1) (supplied only for certain areas)
 
 The AC plug adaptor is not use in Chile. 
Use this plug adaptor in the countries where it is necessary.
SHAKE-X1D only
•  Unit: HCD-SHAKEX1 (1)
•  Speaker system: SS-SHAKEX1 (2)
•  AC power cord (mains lead) (1)
•   AC plug adaptor (1) (supplied only for certain areas)
   
The AC plug adaptor is not use in Chile. Use this plug 
adaptor in the countries where it is necessary.
Design and specifications are subject to change without notice.
License and Trademark Notice
•  
 is a trademark of DVD Format/Logo Licensing Corporation.
•  
“DVD+RW”, “DVD-RW”, “DVD+R”, “DVD-R”, “DVD VIDEO”, 
and the “CD” logos are trademarks.
•   MPEG Layer-3 audio coding technology and patents licensed from 
Fraunhofer IIS and Thomson.
•   Windows Media is either a registered trademark or trademark of 
Microsoft Corporation in the United States and/or other countries.
•   This product is protected by certain intellectual property rights 
of Microsoft Corporation. Use or distribution of such technology 
outside of this product is prohibited without a license from 
Microsoft or an authorized Microsoft subsidiary.
•   “WALKMAN” and “WALKMAN” logo are registered trademarks 
of Sony Corporation.
•  This system incorporates Dolby* Digital. 
   
Manufactured under license from Dolby Laboratories.
   
Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.
•  
The BLUETOOTH
®
 word mark and logos are registered 
trademarks owned by Bluetooth SIG, Inc. and any use of such 
marks by Sony Corporation is under license. Other trademarks and 
trade names are those of their respective owners.
•   The N Mark is a trademark or registered trademark of NFC Forum, 
Inc. in the United States and in other countries.
•  Android™ is a trademark of Google Inc.
•  Google Play™ is a trademark of Google Inc.
•   Apple, the Apple logo, iPhone, and iPod touch are trademarks 
of Apple Inc., registered in the U.S. and other countries. App 
Store is a service mark of Apple Inc.
•  
“Made for iPod” and “Made for iPhone” mean that an 
electronic accessory has been designed to connect specifically 
to iPod or iPhone, respectively, and has been certified by the 
developer to meet Apple performance standards. Apple is not 
responsible for the operation of this device or its compliance 
with safety and regulatory standards. Please note that the use 
of this accessory with iPod or iPhone may affect wireless 
performance.
•   THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL 
PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND 
NON-COMMERCIAL USE OF A CONSUMER FOR
 
(i)   ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-
4 VISUAL STANDARD (“MPEG-4 VIDEO”)
 AND/OR
  (ii)  DECODING MPEG-4 VIDEO THAT WAS ENCODED BY 
A CONSUMER ENGAGED IN A PERSONAL AND NON-
COMMERCIAL ACTIVITY AND/OR WAS OBTAINED 
FROM A VIDEO PROVIDER LICENSED TO PROVIDE 
MPEG-4 VIDEO.
   
NO LICENSE IS GRANTED OR SHALL BE IMPLIED 
FOR ANY OTHER USE. ADDITIONAL INFORMATION 
INCLUDING THAT RELATING TO PROMOTIONAL, 
INTERNAL AND COMMERCIAL USES AND LICENSING 
MAY BE OBTAINED FROM MPEG LA, L.L.C.
 HTTP://WWW.MPEGLA.COM
•   
All other trademarks are trademarks of their respective 
owners.
Ver. 1.1
Page of 96
Display

Click on the first or last page to see other HCD-SHAKEX3 / HCD-SHAKEX7 service manuals if exist.