HCD-SHAKE100, HCD-SHAKE99 - Sony Audio Service Manual (repair manual). Page 2

0 OR  DOTTED  LINE  

0 ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  

• Abbreviation
 AR  : 

Argentina 

model

 AUS : 

Australian 

model

  E2 

: 120V AC area in E model

  E51 

: Chilean and Peruvian models

  EA 

: Saudi Arabia model

  MX 

: Mexican model

  MY 

: Malaysia model

  SAF 

: South African model

SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, 
screws, and all other exposed metal parts for AC leakage. Check 
leakage as described below.

LEAKAGE  TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes).
Leakage current can be measured by any one of three methods.
1.  A commercial leakage tester, such as the Simpson 229 or RCA
 

WT-540A. Follow the manufacturers’ instructions to use these

 instruments.
2.  A battery-operated AC milliammeter. The Data Precision 245
 

digital multimeter is suitable for this job.

3.  Measuring the voltage drop across a resistor by means of a
 

VOM or battery-operated AC voltmeter. The “limit” indication

 

is 0.75 V, so analog meters must have an accurate low-voltage

 

scale. The Simpson 250 and Sanwa SH-63Trd are examples

 

of a passive VOM that is suitable. Nearly all battery operated

 

digital multimeters that have a 2V AC range are suitable. (See

 Fig. 

A)

General
Power requirements
 US 

model:

 

AC 120 V, 60 Hz

 MX 

model:

 

AC 120 V – 240 V, 60 Hz

 

AR model (SHAKE-99):

 

AC 220 V – 240 V, 50/60 Hz

 E51 

model:

 

AC 220 V – 240 V, 50 Hz

 

AUS model (SHAKE-99):

 

AC 230 V – 240 V, 50/60Hz

 Other 

models:

 

AC 120 V – 240 V, 50/60 Hz

Power consumption
 700 

W

Power consumption (at the Power Saving mode)
 

0.5 W (When “BT STANDBY” is set to “STANDBY OFF”)

 

4 W (When “BT STANDBY” is set to “STANDBY ON”)

Dimensions (w/h/d) (excl. speakers)
(Approx.)
 

500 mm × 220 mm × 380 mm 

 (19 

3

⁄

4

 in × 8 

3

⁄

4

 in × 15 in)

Mass (excl. speakers) (Approx.)
 

10.0 kg (22 lb 1 oz)

Supplied accessories
 

Remote control (1)

 

R6 (Size AA) batteries (2)

 

FM lead/AM loop antenna (1)

 

Video cord (1) (SHAKE-100D)

Design and specifi cations are subject to change without notice.

License and Trademark Notice
•  

 is a trademark of DVD Format/Logo Licensing Corporation.

•  

“DVD+RW”, “DVD-RW”, “DVD+R”, “DVD-R”, “DVD VIDEO”, 
and the “CD” logos are trademarks.

•   MPEG Layer-3 audio coding technology and patents licensed from 

Fraunhofer IIS and Thomson.

•   Windows Media is either a registered trademark or trademark of 

Microsoft Corporation in the United States and/or other countries.

•   This product is protected by certain intellectual property rights 

of Microsoft Corporation. Use or distribution of such technology 
outside of this product is prohibited without a license from 
Microsoft or an authorized Microsoft subsidiary.

•   “WALKMAN” and “WALKMAN” logo are registered trademarks 

of Sony Corporation.

•  This system incorporates Dolby* Digital. 
   

* 

Manufactured under license from Dolby Laboratories.

   

Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.

•  

The Bluetooth

®

 word mark and logos are registered trademarks 

owned by Bluetooth SIG, Inc. and any use of such marks by Sony 
Corporation is under license. Other trademarks and trade names 
are those of their respective owners.

•   The N Mark is a trademark or registered trademark of NFC Forum, 

Inc. in the United States and in other countries.

•  Android™ is a trademark of Google Inc.

•  Google Play™ is a trademark of Google Inc.

•   iPhone and iPod touch are trademarks of Apple Inc., registered in 

the U.S. and other countries. App Store is a service mark of Apple 
Inc.

•  

“Made for iPod” and “Made for iPhone” mean that an 
electronic accessory has been designed to connect specifically 
to iPod or iPhone, respectively, and has been certified by the 
developer to meet Apple performance standards. Apple is not 
responsible for the operation of this device or its compliance 
with safety and regulatory standards. Please note that the use 
of this accessory with iPod or iPhone may affect wireless 
performance.

•   THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL 

PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND 
NON-COMMERCIAL USE OF A CONSUMER FOR

 

(i)   ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-

4 VISUAL STANDARD (“MPEG-4 VIDEO”)

AND/OR

  (ii)  DECODING MPEG-4 VIDEO THAT WAS ENCODED BY 

A CONSUMER ENGAGED IN A PERSONAL AND NON-
COMMERCIAL ACTIVITY AND/OR WAS OBTAINED 
FROM A VIDEO PROVIDER LICENSED TO PROVIDE 
MPEG-4 VIDEO.

NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR 
ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING 
THAT RELATING TO PROMOTIONAL, INTERNAL AND COM-
MERCIAL USES AND LICENSING MAY BE OBTAINED FROM 
MPEG LA, L.L.C.
HTTP://WWW.MPEGLA.COM

•   

All other trademarks and registered trademarks are of their 
respective holders. In this manual, ™ and ® marks are not 
specifi ed.