Read Sony HCD-LS1 Service Manual online
14
OPTICAL PICK-UP KSS-540A
INSTALLING A OPTICAL PICK-UP KSS-540A
1
two screws
(P1.7
(P1.7
×
4)
6
optical pick-up KSS-540A
5
pick-up flexible board
2
screw
(P2.6
(P2.6
×
3)
3
two SH lock plate SLs
2
screw
(P2.6
(P2.6
×
3)
3
two SH lock plate SLs
4
PU guide shaft SL
Note: Before disconnecting the pick-up
flexible board from the optical pick-up
KSS-540A, short the laser diode
shorting lands on the bottom of the
optical pick-up KSS-540A.
Refer to Fig. D.
KSS-540A, short the laser diode
shorting lands on the bottom of the
optical pick-up KSS-540A.
Refer to Fig. D.
pick-up flexible board
1. Connect the pick-up flexible board to the optical pick-up KSS-540A.
2. Open the laser diode shorting lands on the bottom of the optical pick-up KSS-540A.
2. Open the laser diode shorting lands on the bottom of the optical pick-up KSS-540A.
Note: Use the soldering iron whose metal part
is grounded or a ceramic soldering iron.
(Fig. D)
Click on the first or last page to see other HCD-LS1 service manuals if exist.