Read Sony HCD-LS1 Service Manual online
13
MOTOR (SLED) (M1)
INSTALLING A MOTOR (SLED) (M1)
1
Remove two solders of
the sled motor leads (M1).
the sled motor leads (M1).
5
first gear
Note: When first gear is removed,
make sure to install a bland
new gear.
new gear.
6
motor (sled)
(M1)
(M1)
Note: Pay attention to the motor (sled)
installing direction.
2
washer
3
second gear
4
two screws
(P1.7
(P1.7
×
2.5)
0.1 mm
motor (sled) (M1)
first gear
(Fig. C)
Note: Press fit a new first gear so that the gap
between the chassis surface and the bottom
of first gear is 0.1mm as shown in Fig. C.
of first gear is 0.1mm as shown in Fig. C.
Click on the first or last page to see other HCD-LS1 service manuals if exist.