Read Sony HCD-LS1 Service Manual online
17
DISC LOCK ARM SL
INSTALLING THE DISC LOCK ARM SL
sellotape
(Fig. F. 1)
disc lock SL ass’y
D lock spring SL
2
washer
3
disc lock arm SL
1
Apply sellotape to the disc lock SL ass’y as shown in
figure to prevent the disc lock from falling off while
removing the disc arm SL.
figure to prevent the disc lock from falling off while
removing the disc arm SL.
disc lock arm SL
disc lock pinion
(Fig. F. 2)
washer
POSITIONING OF THE DISC LOCK ARM SL IS REQUIRED. (Refer to Fig. F. 2)
(1) Place the disc lock spring SL as shown in the figure.
(2) Insert the disc lock pinion into the hole on the disc lock arm SL.
(3) Adjust the position of the disc lock arm SL until its mark meets
(2) Insert the disc lock pinion into the hole on the disc lock arm SL.
(3) Adjust the position of the disc lock arm SL until its mark meets
the V-cut of the disc lock pinion as shown in the figure.
(4) Insert the shaft hole of the disc lock arm SL into the shaft.
(5) Hook the end of the disc lock spring SL on the chassis hole as
(5) Hook the end of the disc lock spring SL on the chassis hole as
shown in the figure.
(6) Reassemble the washer in place.
(7) Peel off the sellotape. Refer to Fig. F. 1.
(7) Peel off the sellotape. Refer to Fig. F. 1.
Click on the first or last page to see other HCD-LS1 service manuals if exist.