DAR-X1R, HCD-X1R - Sony Audio Service Manual (repair manual). Page 23

23

23

HCD-X1R

1) Color monitor
2) Oscilloscope 1 or 2 phenomena, band width over 100 MHz,

with delay mode

3) DVD reference disc

HLX-507 (PAL single layer) (Part No. J-6090-077-A)
HLX-506 (PAL dual layer) (Part No. J-6090-078-A)

<Purpose>
This check confirms that the component Y signal output has the
rated amplitude. If this signal level is not correct, brightness of the
video signal will not be too dark or too thin when the COMPONENT
jack output signal is connected to a projector having COMPONENT
input.

Mode

Playback mode

Signal

Color bars

Check point

COMPONENT VIDEO OUT (Y) jack

(J703) (75 

Ω

 terminated)

Instrument

Oscilloscope

Specification

1.0 

±

 0.07 Vp-p

1) Insert the DVDreference disc and playback the 100% color

bars.

2) Confirm that the Y level is 1.0 

±

 0.07 Vp-p.

1.0 

±

 0.07 Vp-p

<Purpose>
This check confirms that the B-Y signal of the component video
conforms to the PAL standard. If this signal level is not correct,
color of the video signal will have different color when the
COMPONENT jack output signal is connected to a projector having
COMPONENT input.

Mode

Playback mode

Signal

Color bars

Check point

COMPONENT VIDEO OUT (P

B

/C

B

) jack

(J703) (75 

Ω

 terminated)

Instrument

Oscilloscope

Specification

700 

±

 50 mVp-p

1) Insert the DVD reference disc and playback the 100% color

bars.

2) Confirm that the B-Y level is 700 

±

 50 mVp-p.

<Purpose>
This check confirms that the R-Y signal of the component video
conforms to the PAL standard. If this signal level is not correct,
color of the video signal will have different color when the
COMPONENT jack output signal is connected to a projector having
COMPONENT input.

Mode

Playback mode

Signal

Color bars

Check point

COMPONENT VIDEO OUT (P

R

/C

R

) jack

(J703) (75 

Ω

 terminated)

Instrument

Oscilloscope

Specification

700 

±

 50 mVp-p

1) Insert the DVD reference disc and playback the 100% color

bars.

2) Confirm that the R-Y level is 700 

±

 50 mVp-p.

700 

±

 50 mVp-p

700 

±

 50 mVp-p 

1. Connect the i LINE 1 – TV connector (CN2852) on the ER

board to the monitor.

2. Press the

I/

1

button to turn the power on.

3. Press the [SYSTEM MENU] key on the remote commander to

display menu screen.

4. Press the

X

/

x

key on the remote commander to select

“SETUP” and press the 

 key on the remote commander.

5. Press the

X

/

x

key on the remote commander to select

“Others” and press the 

 key on the remote commander.

6. Press the

X

/

x

key on the remote commander to select

“Factory Setup” and press the 

 key on the remote commander

to the monitor display for selecting a group of settings appears.

7. Press the

X

/

x

key on the remote commander to select

“ALL” and press the 

 key on the remote commander.

8. To execute the cold reset, select the “Start” and press the 

key on the remote commander.

9. The message “Setting are complete” appears on the monitor.

1. Press the

I/

1

button to turn the power on.

2. Press three buttons of [INPUT SELECT], [REC STOP]  and

[HDD] simultaneously.

3. When the [VOLUME --]  button is pressed, the message

“VOLUME MIN” appears on the fluorescent indicator tube.

4. When the [VOLUME +]  button is pressed, the message

“VOLUME MAX” appears on the fluorescent indicator tube.

5. To release this mode, press the

I/

1

button to execute the COLD

RESET.

1. Press the

I/

1

button to turn the power on.

2. P r e s s   t h r e e   bu t t o n s   o f  [FM/AM], [REC STOP] a n d

N

simultaneously to display the version on the fluorescent
indicator tube. Each time those three buttons are pressed, it
displays as follows.

SYSCON version (RD-60AU board IC103)

r

ITCON version (AV-103AU board IC603)

r

STR version (IC1002 in the SA-WSX1R)

r

Model name

r

Back to the normal mode

1. Press the

I/

1

button to turn the power on.

2. Press two buttons of [INPUT SELECT] and

x

simultaneously.

3. Progressive output is turned off.

1. In the standby or power on status, press down the

I/

1

button

for more than 10 seconds until “WELCOME” appears on the
fluorescent indicator tube.

2. Several seconds later, it returns to the standby mode.

When this operation is executed, all contents recorded on the HDD
will be erased.

1. The message “HDD ERROR” appears on the fluorescent

indicator tube if error occurred of the HDD as data discord. In
this case, press down the [HDD]  button for more than 10
seconds until “FORMAT” appears on the fluorescent indicator
tube.

1. Press the

I/

1

button to turn the power on.

2. While pressing the 

x

button, press the

Z

button until

“TRAYLOCKED” appears on the fluorescent indicator tube
(around 5 seconds).

3. To  release this mode, while pressing the 

x

button, press

the

Z

button until “UNLOCKED” appears on the fluorescent

indicator tube (around 5 seconds).

1. While pressing the

Z

button, connect the AC power cord to

the power outlet.

2. The disc tray is opened in around 20 seconds.
3. To release this mode, press the

I/

1

button until “WELCOME”

appears on the fluorescent indicator tube (around 10 seconds).

This operation can use while the disc anti-theft is working.