DAR-X1R, HCD-X1R - Sony Audio Service Manual (repair manual). Page 21

21

1) When the [1] key is pressed, the monitor display moves to the

Version No check menu screen.

Service Mode<< Version No >>

MODEL

HCX1662EC

Region Code

[X]

SYSCON Version

[X.XX]

ITCon Version

[XXXXXXX]

Drive Version

[X.XX]

•

Verifying version number of the respective software.

2) When the [2] key is pressed, the monitor display moves to the

Display Color check menu screen.

Service Mode<< Display Color >>

1) White Signal ON
2) White Signal OFF

•

Setting ON/OFF of the PAL 100% white signal output.

3) When the [3] key is pressed, the monitor display moves to the

Total Time check menu screen.

Service Mode<< Total Time >>

1) Total[[Power ON]]
2) Total[[DVD Playback]]
3) Total[[DVD Recording]]

•

Reading the accumulative operating hours of the drive.
Total power-on hours
Total DVD playback hours
Total DVD recording hours
* Display format: XX hours XX minutes

4) When the [4] key is pressed, the monitor display moves to the

Error History menu screen.

Service Mode<< Error History >>

3) ..............................
2) ..............................
1) ..............................

•

Displaying the error history in the past in the error code.
* Maximum 14 errors can be displayed.

5) When the [5] key is pressed, the monitor display moves to the

Command History check menu screen.

Service Mode<< Command History >>

3) ..............................
2) ..............................
1) ..............................

•

Displaying history of the buttons pressed in the past.

* Pressed buttons for 400 commands at a maximum can be

stored.

6) When the [6] key is pressed, the monitor display moves to the

History Clear check menu screen.

Service Mode<< History Clear >>

Execute History Clear?

           YES           NO

RETURN                          ENTER

•

Clearing the Error History and the Command History.

7) When the [7] key is pressed, the monitor display moves to the

Factory Setup check menu screen.

Service Mode<< Factory Setup >>

1) NOR Factory Setup
2) S-AND Factory Setup
3) HDD-Data Factory Setup

•

Returning the Set Ups of various functions to default.

8) When the [8] key is pressed, the monitor display moves to the

Device check menu screen. (Refer to “6. Device Check Menu
(Diagnostic Test)” (page 22))

9) When the [9] key is pressed, the monitor display moves to the

hard disk check menu screen. (Refer to “7. Hard Disk Check
Menu” (page 22))

0) When the [0] key is pressed, the monitor display moves to the

G-code Setting menu screen.

G-code OSD Setting Menu

1) G-CODE
2) Show View
3) Video Plus
4) VCR Plus+