Read Sony CPF-IX001 / NAS-IX001P Service Manual online
6
NAS-IX001P
To connect/disc onnect the
network unit
network unit
Connecting
1
Turn off the power switch
?/a
on the
subwoofer.
2
Connect the network unit as shown below.
Disconnecting
1
Press SUSPEND to set the network unit to
the suspended mode.
the suspended mode.
2
Turn off the power switch
?/a
on the
subwoofer.
3
Disconnect the network unit as shown
below.
below.
Note
If the network unit is disconnected without first setting
it to the suspended mode, the settings may not be
saved.
it to the suspended mode, the settings may not be
saved.
For the network connections and settings, refer
to the “Quick Setup Guide” supplied with the
CPF-IX001.
to the “Quick Setup Guide” supplied with the
CPF-IX001.
5: Connecting the CPF-
IX001 to the network
IX001 to the network
To turn on the CPF-IX001
1
Connect the power cord to a wall outlet.
2
Turn on the power switch
?/a
on the
subwoofer.
The ON indicator on the main unit lights up
green.
The power is also supplied to the main unit and
the network unit.
The demonstration appears in the display. When
you press SUSPEND, the network unit starts up
and the demonstration automatically ends. You
can also turn off the demonstration by setting it
beforehand.
green.
The power is also supplied to the main unit and
the network unit.
The demonstration appears in the display. When
you press SUSPEND, the network unit starts up
and the demonstration automatically ends. You
can also turn off the demonstration by setting it
beforehand.
To turn off the CPF-IX001
Press SUSPEND to set the network unit to the
suspended mode, and then turn off the power
switch
suspended mode, and then turn off the power
switch
?/a
on the subwoofer.
Notes
• When the power switch ?/a is turned off, the AC
power shuts down. Install the CPF-IX001 so that the
power switch ?/a can be turned off immediately in
the event of trouble.
power switch ?/a can be turned off immediately in
the event of trouble.
• The network unit is not turned off as long as the
power switch ?/a on the subwoofer is on.
To turn the demonstration mode
on and off
on and off
Press DISPLAY while the network unit is set to
the suspended mode.
the suspended mode.
You can listen to music stored on the connected
media server with the CPF-IX001.
You can select your desired media server to be
your default server. Doing so prevents you from
having to make the selection each time you use
network function.
media server with the CPF-IX001.
You can select your desired media server to be
your default server. Doing so prevents you from
having to make the selection each time you use
network function.
Tip
You can also listen to music stored on DLNA-
compliant servers other than M-crew Server Ver. 2.0.
compliant servers other than M-crew Server Ver. 2.0.
1
Start up your desired media server on
your computer.
your computer.
2
Press SUSPEND to start up the
network unit.
network unit.
When there is only one server, this
completes the operation.
When there are multiple servers,
“SERVER?” appears, then press ENTER.
completes the operation.
When there are multiple servers,
“SERVER?” appears, then press ENTER.
3
Press
.
or
>
repeatedly to select
the desired media server, then press
ENTER.
ENTER.
The selected server is set to the default
server.
server.
Note
You can use the following functions only when using
the M-crew Server Ver . 2.0 as a media server.
the M-crew Server Ver . 2.0 as a media server.
– MUSIC SURFIN’
– PLAYLIST
– FAVO RITE PLAYL IST
– WEB RADIO
6: Turning on/off the CPF-
IX001
IX001
Power switch
?/a
7: Connecting a server
Checking the network status
Tip
Yo u can check the wireless strength on the display.
When the signal is weak or out of range, move the
CPF-IX001 and the wireless LAN router closer
together, or remove any obstacles between them.
When the signal is weak or out of range, move the
CPF-IX001 and the wireless LAN router closer
together, or remove any obstacles between them.
Network
illumination
illumination
System status
Flashes slowly
The CPF-IX001 is
communicating with the server.
communicating with the server.
Lights up
The network function is being
used.
used.
Flashes quickly
An error has occurred.
Display
Communication status
Flashes:
Out of range
Lights steadily:
Weak
Medium
Excellent
You are now finished setting up your CPF-IX001.
For further information, see the “M-crew Server
Ver. 2.0” Help.
For further information, see the “M-crew Server
Ver. 2.0” Help.
Network illumination
You can register and store audio data from an
audio CD or audio data from the hard disk drive
of your computer to the M-crew Server Ver. 2.0.
You can then listen to the music registered to the
M-crew Server Ver. 2.0 through the CPF-
IX001’s speaker.
For details on registering audio data, refer to the
“M-crew Server Ver. 2.0” Help contained on the
supplied CD-ROM.
audio CD or audio data from the hard disk drive
of your computer to the M-crew Server Ver. 2.0.
You can then listen to the music registered to the
M-crew Server Ver. 2.0 through the CPF-
IX001’s speaker.
For details on registering audio data, refer to the
“M-crew Server Ver. 2.0” Help contained on the
supplied CD-ROM.
You can listen to music stored on your computer
through the CPF-IX001’s speaker. You can
easily search for the desired track by using
GENRE, ARTIST or ALBUM (MUSIC
SURFIN’). Make sure you have registered audio
data to the media server.
through the CPF-IX001’s speaker. You can
easily search for the desired track by using
GENRE, ARTIST or ALBUM (MUSIC
SURFIN’). Make sure you have registered audio
data to the media server.
1
Press FUNCTION repeatedly to switch
the function to the network function.
the function to the network function.
The LINE indicator on the main unit turns
off.
off.
2
Select the searching criteria using
GENRE, ARTIST or ALBUM.
GENRE, ARTIST or ALBUM.
Playback starts when you press the button.
Tip
You can also search for tracks using a combination of
the Genre, Artist and Album modes.
the Genre, Artist and Album modes.
To listen to all tracks
Press ALL.
Listening to music
– MUSIC SURFIN’
– MUSIC SURFIN’
Registering tracks to the
M-crew Server Ver. 2.0
M-crew Server Ver. 2.0
Listening to music stored
on your computer
on your computer
1
2
N
VOL +/–
./>
m/M
REPEAT
ALL
X/x
PLAY MODE
Select
To
(Genre mode) listen to items sorted
according to the genre
information of the tracks.
information of the tracks.
(Artist mode)
listen to items sorted
according to the artist
information of the tracks.
according to the artist
information of the tracks.
(Album mode) listen to items sorted
according to the album
information of the tracks.
information of the tracks.
(Album mode)
(Artist mode)
Item name
(Genre mode)
Track name
Elapsed playing time
*
Lights up when connected with
M-crew Server Ver. 2.0.
M-crew Server Ver. 2.0.
* Displays the total time when stopped.
Lights up when playing a copyright
protected track.
protected track.
Click on the first or last page to see other CPF-IX001 / NAS-IX001P service manuals if exist.