CPF-IX001, NAS-IX001P - Sony Audio Service Manual (repair manual). Page 3

Read Sony CPF-IX001 / NAS-IX001P Service Manual online

3
NAS-IX001P
SECTION  1
SERVICING  NOTES
FIRMWARE  UPDATING
Confirm the firmware version from the network manu, and update
it as follows.
SERVICE  POSITION
In checking this set, connect the extension jigs as the figure shown below.
ETHER board
PANEL board
CN1510
CN1508
CN1601
CONNECTOR board
CPF-NW001P
extension jig 
(Part No. J-2501-303-A)
extension jig 
(inlluding CONNECTOR board)
(Part No. J-2501-304-A)
CN006
CN007
yellow/red/black/white
yellow/black
RADIO  RECEPTION  CHECK
Note:
For network setting, refer to the Operating Instructions and Quick
Setup Guide of the CPF-IX001.
Setting:
[WIRELESS/WIRED] switch:
WIRELESS
Network environment:
Wireless LAN
Distance from wireless router: 10 m
Procedure:
1. Start up the PC with the “M-crew Server Ver. 2.0” installed.
2. Connect each units and turn on the power.
3. Press the [SUSPEND] key on the remote commander to wake-
up the set and wait until connect with sever PC. If there are
multiple servers, “SERVER?” appears, then press the [ENTER]
key on the remote commander. And select the server by the
.
  or 
>
  key on the remote commander, then press the
[ENTER] key.
4. Confirm that the wireless icon indicates 2 or 3 bars.
5. If indicated bar is 1 or less, reduce the distance from wireless
router to 1 to 2 m, and confirm that the icon is indicated as
follow.
Transmission rate is IEEE802.11g: 3 bars
Transmission rate is IEEE802.11b: 2 bars
Wireless icon
Firmware update window
Update the firmware for the CPF-IX001.
1
The version of the current firmware is displayed.
 
2
Select the firmware file you want to update.
Click [Browse] to show the dialog for selecting the firmware.
 
3
Click the button to update.
When you click the button, the firmware confirmation window appears.
 
If you select the right firmware, updating starts. The CPF-IX001 restarts 
automatically when the update is completed. 
If you select an incorrect firmware, click [Retry] and select the correct one.
 
Notes
• Do not restart the CPF-IX001, set it to the suspended mode, or turn off the 
power while updating the firmware. 
• Check  the  following website for CPF-IX001 
firmware updates;
USA:
http://esupport.sony.com/?ref=http%3A//
www.sony.com/index.php
Canada:
http://www.sony.ca/sonyca/view/english/warranty/
consumer_support.shtml
Europe:
http://support.sony-europe.com/main/main.asp?l=en
Page of 35
Display

Click on the first or last page to see other CPF-IX001 / NAS-IX001P service manuals if exist.