Read Sony CPF-IX001 / NAS-IX001P Service Manual online
8
NAS-IX001P
By using the network menu, you can make
various settings on network.
various settings on network.
1
Press MENU.
2
Press
.
or
>
repeatedly to select
the item that you want to set.
3
Press ENTER.
To turn off the network menu
Press MENU repeatedly until you exit the
network menu.
network menu.
1
Select “SERVER?” in the network
menu, then press ENTER.
menu, then press ENTER.
2
Press
.
or
>
repeatedly to select
the desired media server, then press
ENTER.
ENTER.
Note
You can select the server from up to 10 servers.
Advanced network settings
Using the network menu
Item
See
SERVER?
“Selecting another server”.
NET SETUP?
“Making network settings
manually”.
manually”.
RESTART?
“Restarting the network
unit”.
unit”.
WLAN SETUP?
Refer to the “Quick Setup
Guide” supplied with the
CPF-IX001.
Guide” supplied with the
CPF-IX001.
REGISTER?
“Registering the CPF-
IX001 on your computer
manually”.
IX001 on your computer
manually”.
NET INFO?
“Checking network
settings”.
settings”.
VERSION?
(Confirm the CPF-IX001
firmware version)
firmware version)
1
3
2
Selecting another server
By default the CPF-IX001 acquires an IP
address automatically. Use the following
procedure to specify an IP address, if necessary.
Note that when the CPF-IX001 is used in an
environment containing a router with DHCP,
you should not need to specify the IP address of
the CPF-IX001.
address automatically. Use the following
procedure to specify an IP address, if necessary.
Note that when the CPF-IX001 is used in an
environment containing a router with DHCP,
you should not need to specify the IP address of
the CPF-IX001.
1
Select “NET SETUP?” in the network
menu, then press ENTER.
menu, then press ENTER.
2
Press
.
or
>
repeatedly until
“NET TYPE?” appears, then press
ENTER.
ENTER.
3
Press
.
or
>
repeatedly until
“MANUAL?” appears, then press
ENTER.
ENTER.
“IP ADDRESS?” appears.
4
Press ENTER again.
The currently set IP address appears.
5
Press
.
or
>
repeatedly to enter
the numeric values of the IP address.
Press m or M repeatedly to select the
digit that you want to set.
digit that you want to set.
6
Press ENTER.
“SUBNET MASK?” appears.
7
Press ENTER again.
The currently set subnet mask appears.
8
Press
.
or
>
repeatedly to enter
the numeric values of the subnet mask.
Press m or M repeatedly to select the
digit that you want to set.
digit that you want to set.
9
Press ENTER.
“GATEWAY ?” appears.
10
Press ENTER again.
The current default gateway appears.
11
Press
.
or
>
repeatedly to enter
the numeric values of the default
gateway.
gateway.
Press m or M repeatedly to select the
digit that you want to set.
digit that you want to set.
12
Press ENTER.
13
Press SUSPEND to set the network unit
to the suspended mode.
to the suspended mode.
14
Press SUSPEND again to start up the
network unit.
network unit.
To return to the automatic
setting
setting
1
Select “NET SETUP?” in the network menu,
2
Press
.
or
>
repeatedly until “NET
TYPE?” appears, then press ENTER.
3
Press
.
or
>
repeatedly until “AUTO?”
appears, then press ENTER.
4
Press SUSPEND to set the network unit to
the suspended mode.
the suspended mode.
5
Press SUSPEND again to start up the
network unit.
network unit.
Select “RESTART? ” in the network menu,
then press ENTER.
Making network settings
manually
manually
Restarting the network
unit
unit
When the CPF-IX001 is connected to your
computer after installing the M-crew Server
Ver. 2.0 software, the CPF-IX001 is registered
automatically on your computer.
Register the CPF-IX001 on your computer
manually for higher security.
computer after installing the M-crew Server
Ver. 2.0 software, the CPF-IX001 is registered
automatically on your computer.
Register the CPF-IX001 on your computer
manually for higher security.
1
Select “REGISTER?” in the network
menu, then press ENTER.
menu, then press ENTER.
The count down display appears in the
display of the CPF-IX001.
display of the CPF-IX001.
2
Click [Start] – [All programs] – [M-crew
Server] – [TOOLS] – [EQUIPMENT
LIST] in that order to display the screen
on the M-crew Server Ver. 2.0.
Server] – [TOOLS] – [EQUIPMENT
LIST] in that order to display the screen
on the M-crew Server Ver. 2.0.
For details, see the “M-crew Server Ver.
2.0” Install Manual included on the
supplied CD-ROM.
2.0” Install Manual included on the
supplied CD-ROM.
3
During displaying the count down
display, set “Equipment selection
mode” to “Manual”, and then click
[Add] on your computer.
display, set “Equipment selection
mode” to “Manual”, and then click
[Add] on your computer.
The registration starts.
“Complete!” appears in the display of the
CPF-IX001 when the registration is
completed.
CPF-IX001 when the registration is
completed.
Notes
• When the registration is incomplete, “Incomplete!”
appears in the display of the CPF-IX001.
• Step 3 must be performed within 5 minutes after
performing step 1.
1
Select “NET INFO?” in the network
menu, then press ENTER.
menu, then press ENTER.
2
Press
.
or
>
repeatedly to select
the item that you want to check, then
press ENTER.
press ENTER.
Each time you press ENTER, the display
changes cyclically as follows:
changes cyclically as follows:
NET TYPE? t AUTO* t
IP ADDRESS? t IP address* t
SUBNET MASK? t Subnet mask* t
GAT EWAY? t Default Gateway* t
MAC ADDRESS? t MAC address t
SERVER NAME? t Connected server*
t MY NAME? t Name assigned by
M-crew Server Ver. 2.0*
IP ADDRESS? t IP address* t
SUBNET MASK? t Subnet mask* t
GAT EWAY? t Default Gateway* t
MAC ADDRESS? t MAC address t
SERVER NAME? t Connected server*
t MY NAME? t Name assigned by
M-crew Server Ver. 2.0*
* The display may differ depending on the
settings.
Registering the CPF-IX001
on your computer
manually
on your computer
manually
Checking network
settings
settings
Selecting the surround effect
Press SURROUND.
Each time you press the button, the surround
effect changes as follows:
effect changes as follows:
Off y On
The SURROUND indicator on the main unit
turns on and off each time you press
SURROUND.
turns on and off each time you press
SURROUND.
Adjusting the bass and treble
You can adjust the bass and treble.
Press BASS +/– or TREBLE +/– repeatedly
to adjust the level you want to set
(
to adjust the level you want to set
(
±
3 steps).
To reset the ba ss and treble
settings
settings
Press EQ OFF.
You can set the network unit to the suspended
mode after a certain time, so that you can fall
asleep to music.
mode after a certain time, so that you can fall
asleep to music.
Press SLEEP.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
90min t 80min t … t 10min t OFF t
90min t …
display (the turn-off time) changes cyclically as
follows:
90min t 80min t … t 10min t OFF t
90min t …
Other operations
If no operation is performed for about a few
minutes, the display darkens to minimize the
amount of power consumed (Auto dimmer
function).
minutes, the display darkens to minimize the
amount of power consumed (Auto dimmer
function).
To cancel Auto dimmer function
Press any button other than FUNCTION,
SURROUND, EQ OFF, BASS +/–,
TREBLE +/– or VOL +/– (or VOLUME +/– on
the main unit).
SURROUND, EQ OFF, BASS +/–,
TREBLE +/– or VOL +/– (or VOLUME +/– on
the main unit).
Other operations
Adjusting the sound
TREBLE +/–
BASS +/–
SURROUND
EQ OFF
Falling asleep to music
— Sleep Timer
To
Press
Check the
remaining time
remaining time
SLEEP once.
Change the time
to turn off
to turn off
SLEEP repeatedly to select the
time you want.
time you want.
Cancel the Sleep
Timer Function
Timer Function
SLEEP repeatedly until “OFF”
appears.
appears.
Turning off the display
then press ENTER.
Click on the first or last page to see other CPF-IX001 / NAS-IX001P service manuals if exist.