BDV-E500W, HCD-E500W - Sony Audio Service Manual (repair manual). Page 19

Screen 2: Displays the Error Log
Operation:
[

<

] 

Returns to the previous page

[

,

] 

Moves to the next page

[RETURN] Returns to the screen (screen 1) that selects the log 

type

[RED] 

Writes the log contents to an USB memory device

Screen 3: Displays the Command Log
Operation:
[

<

] 

Returns to the previous page

[

,

] 

Moves to the next page

[RETURN] Returns to the screen (screen 1) that selects the log 

type

[RED] 

Writes the log contents to an USB memory device

•  Viewing the log display
Error Log:
 

001 08/01/01 00: 53: 19: [ErrCode: 080400000000]

 

[Number (starting from old log) ] [date] [time] [error 
code]

Command Log:
 

0001 08/01/01 00: 53: 19: 0 POWER 0

 

[Number (starting from old log) ] [date] [time] [count] 
[command name]

 

[Edge 0: on 1: off]

About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB 
memory device inserted into the set

Error Log:
 When 

getErrLogFile.trm 

fi le exists in the USB memory 

device, errlog.log fi le is output.

Command Log:
 When 

getCmdLogFile.trm 

fi le exists in the USB memory 

device, cmdlog.log fi le is output.

*  This function cannot be used when performing USB Host test 

in the Diag screen.

 

Writing to an USB memory devices takes a few seconds. Wait 
suffi ciently before removing device.

 Select Log

 Error Log

 Command Log

3-7.  Factory Initialize (Factory Setiings)
This screen returns the set to the factory settings.
All changes settings will be restored to the factory settings, and all 
saved titles will be deleted. Note that executing this function does 
not complete the initialization process.
The initialization process is completed by rebooting the set after 
operation is performed.
Normal rebooting is required for the initialization to take effect. 
Initialization is not complete when rebooting in special modes 
such as the service mode.

Operation:
Screen 1
Press the [

3

] button in this screen when restoring the set to its 

factory settings.
All saved titles will also be deleted.
[

3

] 

Initialize the set to its factory settings

[RETURN]  Return to the top menu of the service mode

Screen 2
This is the screen that is displayed after performing initialization.
The initialization process is completed by rebooting the set.
Remove the AC power cord and insert the AC power cord again.
*Operations in other service menus can also be performed.

 Factory Initialize

 Factory Initialize