Read Sony BDV-E500W / HCD-E500W Service Manual online
HCD-E500W
16
2-22. Parental Reset Mode
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-23. CD Repeat Mode
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-24. S-AIR Delay Mode
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-25. DSP Sampling Frequency Display Mode
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-26. Power Handling Mode 1
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-27. Power Handling Mode 2
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-28. Repeat Status Display Mode
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
3. BD SERVICE MODE
Note 1: The operation in this mode must use a remote commander.
Note 2: Connect the monitor with this set with the HDMI cable when you
Note 2: Connect the monitor with this set with the HDMI cable when you
execute this mode. This mode cannot be executed when connect-
ing it with CVBS and COMPONENT.
ing it with CVBS and COMPONENT.
Setting method of the BD service mode:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Press three button in order of the [CLEAR]
→ [
3
]
→ [0] →
[1]
→ [0] → [ANGLE] on the remote commander. (Make the
interval when each button is pressed within two seconds)
3. The message “TEST MENU” appears on the fluorescent indi-
cator tube and enter the test menu.
4. Press the [
M
]/[
m
] buttons on the remote commander to select
the “SERVICE IN”, and press the [
3
] button on the remote
commander.
5. Enter the BD service mode.
3-1. Main Functions
• ErrorLog/CommandLog
• ErrorLog/CommandLog
display
Display the error log and command log. Displayed contents
can also be saved in an USB memory device.
can also be saved in an USB memory device.
• Diag
Performs unit test of devices installed on the board.
• Factory
Initialize
Restores the set to its factory settings.
• Network
Checks the network connection.
1. “Ifconfig” displays the network settings of the unit.
1. “Ifconfig” displays the network settings of the unit.
Executing this function will run the #Ifconfig command
and display the result.
and display the result.
2. “Ping” checks the communication status between the net-
work and terminal of the specified IP address.
Executing this function will run the #ping command and
display the result.
display the result.
• Version Up (version update)
Performs version update using a disc. For details concerning
updates, see the attached reference.
updates, see the attached reference.
• Ststem
Information
Displays the system information of the set.
Displays information such as the software version, drive infor-
mation, etc.
mation, etc.
Click on the first or last page to see other BDV-E500W / HCD-E500W service manuals if exist.