Read Sharp VC-S2000 (serv.man18) User Guide / Operation Manual online
7
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
INSTALLING YOUR VCR
AUTO INSTALLATION
PROCEDURE
This model automatically tunes the TV channels for your area, then using Teletext information
sorts the TV channels into a standard order and sets the clock. If the VCR has not previously
been tuned-in, instructions will be given on screen to guide you through this procedure.
1.
Ensure your VCR is still in the STANDBY mode.
2.
Switch on the TV. Select an unused
channel on your TV for your VCR (there
may be a dedicated video channel refer
to your TV operation manual).
3.
Press
STOP
. The VCR will search and
display an ideal RF channel.
•
If you are connected via a scart lead, go to step 5.
CAUTION:
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer
to RF through ON/OFF below.
4.
Tune the selected channel on your TV
(refer to your TV manual) until the menu
screen appears.
5.
Press
SET
to store the RF channel setting
and continue with the installation.
NOTE:
✔
The TV is tuned to the VCR.
•
If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 3 using [
/
] keys.
RF THROUGH ON/OFF:
•
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your
VCR can be turned OFF and ON at point 3 by pressing the
CLEAR
button then
continue with the installation. This will help minimise interference.
VCR
Example:
MENU SCREEN
AUT O I NS T AL L AT I ON
P R E S S
S E T
K E Y
T O S T AR T .
S E T
: E N T E R
ME NU : E X I T
Blue
background
with
White Text
background
with
White Text
TINS-3894 ENGLISH.book Page 7 Wednesday, September 6, 2000 11:53 AM
Click on the first or last page to see other VC-S2000 (serv.man18) service manuals if exist.