VC-S2000 (serv.man18). Operation Manual - Part 4 - Basic operation - Sharp VCR User Guide / Operation Manual. Page 2

Read Sharp VC-S2000 (serv.man18) User Guide / Operation Manual online

 
4
 
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
 
INSTALLING YOUR VCR
 
CONNECTING THE VCR TO THE TV, AERIAL AND 
SATELLITE RECEIVER
 
•
Do not connect a SCART lead if you wish to tune the VCR RF channel, depending on your 
TV (refer to your TV operation manual).
•
To obtain stereo sound output, connect your stereo TV to the AUDIO OUT terminals using 
audio phono leads or to the LINE 1 IN/OUT terminal using SCART leads as shown.
•
Sound from RF OUT terminal is MONO only.
•
If your TV has more than 1 SCART socket, refer to your TV operation manual for correct 
SCART connection to the VCR.
•
For NEXTVIEW LINK operation, a fully wired scart cable must be used.
 
✔
 
The VCR is correctly connected

    
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
G
D
S-VIDEO OUT
SORTIE SON S-VIDEO
1
2
3
 
Connect your existing aerial 
cable to the ANTENNA IN socket 
on your VCR.
 
Optional:
 
 Connect your 
Satellite receiver or decoder to 
the VCR using a scart lead to 
 
LINE 2 IN/DECODER
 
 
socket on the VCR. 
Connect the VCR to the 
mains
 
Optional
 
 SCART (not supplied). If you 
have a scart lead connect it to your TV and 
 
LINE 1 IN/OUT
 
 socket on the VCR. 
- The advantage of a Scart connection is 
improved picture and sound quality during 
playback.
Connect your TV 
to the VCR using 
the supplied RF 
connection cable, 
i.e. connect the 
VCR 
 
RF OUT
 
 
socket to the TV 
 
AERIAL IN
 
 
socket.
 
AERIAL OR
CATV CABLE
DECODER UNIT
 
 
 
OR SATELLITE SYSTEM
BACK OF
TELEVISION
 
TINS-3894 ENGLISH.book  Page 4  Wednesday, September 6, 2000  11:53 AM

Display

Click on the first or last page to see other VC-S2000 (serv.man18) service manuals if exist.

Random: