LC-65XS1E (serv.man3). Adjustment - Sharp TV Service Manual (repair manual). Page 21

LC-52XS1E/RU/LC-65XS1E/RU

3 – 21

7. MENU Operation [MENU BUTTON]

8. OSD Display [ON SCREEN DISPLAY]

9. Start Mode [INPUT MODE START]

10.Mode Fixed [INPUT MODE FIXED]

1. The software of this machine is roughly divided into the following three software.

1) Main microcomputer software

2) Monitor microcomputer software

3) LED microcomputer software

The above-mentioned microcomputer software can rewrite software by using the USB memory to have confirmed the operation.

• USB Memory

Selection

“RESPOND” or “NO RESPOND” is selectable. (Loop is provided.)

Default RESPOND
Function 

The MENU keys on the main unit and R/C MENU are disabled.

Exception

• Regardless of the setting contents, the start operation of the process mode, inspection mode and PUBLIC_Mode is 

enabled.

• Regardless of the setting contents, all keys can be used while entering the process mode, inspection mode or 

PUBLIC_Mode.

Key that becomes invalid 
excluding Default besides 
MENU Key because of 
setting

ON_TIMER, Auto Preset, Manual_Memory, and clock setting.
All Direct Shift keys to the MENU display.

Remarks 

When set to “NO RESPOND”.
• ON_TIMER is set to “OFF”.

Selection 

“YES” or “NO” is selectable. (Loop is provided.)

Default YES
Function 

When set to “NO”, the following OSD is not displayed.
Register, Setting, Adjustment MENU, Channel_Call, Volume Bar In the case of Wide Model, if the following operation is 
performed, it is immediately switched (since MENU can not be displayed).
Input switching.

Keys which can be 
enabled (Exquisite exam-
ple)

Brightness sensor, light control.

Keys disabled when not 
set to Default (Example)

Still screen, screen display, MENU, OFF_TIMER, A V Position, Wide Mode switch, Auto Installation.

Remarks

• When set to “NO”.

a) The OFF_TIMER (SLEEP TIMER) setting time is cleared.

Selection 

“NORMAL”,  “TV(*Channel)”,  “INPUT1”,  “INPUT2” (Loop is provided.)

Default NORMAL
Function 

When the power is ON, the input source or channel to start is set.
In the NORMAL mode, it follows the contents of Last_Memory.

Remarks 

• When set to a mode other than “NORMAL”.

a) It is inhibited to display the Channel Setting MENU and to set the Channel.
b) On start with “ON_TIMER”, the set Channel of ON_TIMER is prior.

• When set to “NORMAL”, “Mode Fixed (START MODE FIXED)” is set to “VARIABLE” to inhibit the selection.
When starting by  "ON_TIMER", the setting Channel of ON_TIMER is priority.

Selection 

“VARIABLE” or “FIXED” is selectable. (Loop is provided.)

Default VARIABLE
Function

When set to “FIXED”, it is disable to switch to other channel or input after start in the set value of  “Start Mode (INPUT 
MODE START)”.

Keys disabled when not 
set to Default (Example)

Channel UP/Down, Direct_Channel Button, FLASHBACK, INPUT, STILL, Digit_Select and Direct input switching.

Remarks 

• When “START MODE” is set to “NORMAL”, this item is disable to set. (Automatically set to “VARIABLE”.)
• When set to “FIXED”.
The Channel setting MENU (Menu-setup-Auto Installation, Programme setup and Child Lock item hatching) and Input 
Selection MENU in MENU are not displayed.