LC-65XS1E (serv.man3). Adjustment - Sharp TV Service Manual (repair manual). Page 20

LC-52XS1E/RU/LC-65XS1E/RU

3 – 20

* The OSD display is an example.

If another ODS is previously displayed, the status is reset (MENU or similar).

2.  Volume Maximum Level [MAXIMUM VOLUME]

3. Volume Fixed [VOLUME FIXED]

4. Volume Fixed Level [VOLUME FIXED LEVEL]

No Power off by power button. No Power off by remote control.

5. R/C Operation [RC BUTTON]

6. Main Unit Operation [PANEL BUTTON]

 Selection 

0~60 (Loop is not provided.)

 Default 

60

Function 

• Even if VOL is adjusted to a value higher than the adjusted one, it is not set to that value. (Only the speakers of

 (Only the speakers of the main unit)

Exception
Remarks

• When it is set to 59 or less, the number is displayed and the volume bar is not displayed during operation in the ordi-

nary mode.

• VOLUME can be abbreviated to VOL.

 Selection 

 “VARIABLE” or “FIXED” is selectable. (Loop is provided.)

 Default 

“VARIABLE”

 Function 

 It is selectable whether or not the volume is fixed to the value adjusted in the volume fixed level mode. 
(Only the speakers of the main unit)

 Exception

• In the adjustment process, the volume can be set as desired regardless of this setting.

Keys disabled when not 
set to Default

• Volume high/low (VOL+/-) (Both R/C and main unit)
• Mute (MUTE)

Remarks

• Volume Fixed is prior to Volume Maximum Level.
• Even if the above disabled keys are operated, the volume is not displayed.
• VOLUME can be abbreviated to VOL.

 Selection 

0~60 (Loop is not provided.)

Default 

Currently set volume

Function 

The volume is fixed to the adjusted value. (Only the speakers of the main unit)

Exception 

• In the adjustment process, the volume can be set as desired regardless of this setting.

Keys disabled when not 
set to Default
Remarks 

• When Volume Fixed is set to “VARIABLE”, the setting is inhibited to change.
• VOLUME can be abbreviated to VOL.

Selection 
Default 
Function

“RESPOND” or “NO RESPOND” is selectable. (Loop is provided.)
RESPOND
R/C key operation is set.
When set to “NO RESPOND”, the R/C keys are disabled in the ordinary mode.
The power key (Power ON/Standby Key) is also disabled.

 Exception 

• Regardless of the setting contents, the process mode, inspection mode and PUBLIC_Mode Key are enabled.
• Regardless of the setting contents, all keys can be used while entering the process mode, inspection mode or 

PUBLIC_Mode.

Remarks 

The CARD function stops all functions including the input switching and direct key when set to “NO RESPOND”.

Selection 
Default 
Function 
Exception 

“RESPOND” or “NO RESPOND” is selectable. (Loop is provided.)
RESPOND
NO RESPOND: Excluding power supply (Video/Standby key), the main unit keys are disabled.
• Regardless of the setting contents, the start operation of the process mode, inspection mode and PUBLIC_Mode is 

enabled.

• Regardless of the setting contents, all keys can be used while entering the process mode, inspection mode and 

PUBLIC_Mode.

When power button on the main unit is pressed

When power button on R/C is pressed

No Power off by remote control.

No Power off by power button.