LC-37X20E (serv.man10) - Sharp TV User Guide / Operation Manual. Page 28

The TV will automatically enter the standby mode if no 
operations are performed during the time span you set 
(“30min.” or “3hr.”).

•  Five minutes before the TV enters standby mode, the 

remaining time displays every minute.

When set to “Yes” the TV activates the following power 
saving mode.

•  OPC set to “On” (Page 24)
•  Standby Mode set to “Mode 2” (Page 32)
•  No Signal Off set to “Enable” (Page 25)
•  No Operation Off set to “3hr.” (Page 26)

Allows you to set a time when the TV automatically 
switches to standby.

NOTE
•  Select “Off” to cancel the sleep timer.
•  When the time has been set, countdown automatically 

starts.

•  Five minutes before the preset of time expires, the 

remaining time displays each minute.

The TV automatically detects and stores all available 
services in your area. This function also allows you to 
perform the channel setting for “Digital” and “Analogue” 
individually and reconfigure the settings after the initial 
auto installation has been completed.

After selecting “Yes” on the screen, you can set 
language and channel search the same as in the 
initial auto installation. Follow steps 2, 4 and 5 
on page 9.

NOTE
•  You cannot set the country setting in “Auto Installation” 

in the Setup menu. If you want to reconfigure the country 
setting, automatically execute initial auto installation after 
executing “Reset” from the Setup menu.

•  The current country setting is displayed on the screen.

You can reconfigure DTV services settings 
automatically or manually.

E 

Use this menu to add new services automatically after 
auto installation has been completed.

E 

Add new services within a specified frequency band.

•  Enter the frequency using 0 - 9 numeric buttons.

E 

Configure various settings for each service using the 
Colour (R, G, Y, B)

 buttons.

MENU    

[Setup ... Programme Setup ... Digital Setting ... Manual Adjust] 

DTV 993 

Service 

No. 

Old

LCN

EPG 
Skip 

CH 

Skip 

Lock 

Service 
Name 

SIT 3 

DTV 994 

✔ ✔ 

SIT 2 

DTV 995 

✔ 

SIT 1 

DTV 996 Monosco 

576-2 

DTV 997 Monosco 

576-1 

DTV 

998 

Color Bar 576i 

DTV 999 HD 

Monosco 

: Lock 

: CH Skip 

: EPG Skip 

: Sort 

Press 

a/b to select the desired service.

Press the colour button on the remote control 
corresponding with the item you want to 
reconfigure.

• The 

✔ mark indicates the operation is set to on. Each 

time the colour button is pressed, you can switch the 
corresponding operation on/off.

. 

When the service is locked, you must enter your PIN 
whenever you tune to the service.

. 

Services with a 

✔ mark are passed over when 

pressing P

r/s in the TV/remote control unit.

. 

Services with a 

✔ mark are passed over in the 

Electronic Programme Guide (EPG).

. 

The item position of services can be sorted.

1 Press a/b to select the service whose item    

  position you want to move, and then press OK.

DTV 994 

✔ ✔ 

SIT 2 

DTV 995 

✔ 

SIT 1 

2 Press a/b to move it to the desired position,  

  and then press OK.

DTV

994

✔

✔

SIT 1

DTV

995

✔

SIT 2

3 Repeat steps 1 and 2 until all desired service   

  items are sorted.

LC-3237X20E-gb.indd   26

LC-3237X20E-gb.indd   26

2007/08/31   16:58:35

2007/08/31   16:58:35