Read Sharp XG-V10WE Handy Guide online
Lamp Replacement Procedure
Version 1.1
Issue 04/2006
Issue 04/2006
12
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
4.
Remove the lamp unit cover.
•
Loosen the user service screw that secures the lamp unit
cover. Then open the cover in the direction of the arrow.
cover. Then open the cover in the direction of the arrow.
5.
Remove the lamp unit.
•
Loosen the securing screws from the lamp unit.
Hold the lamp unit by the handle and pull it in
the direction of the arrow.
Hold the lamp unit by the handle and pull it in
the direction of the arrow.
6.
Attach the lamp cage cover and turn on the main
power.
power.
•
Slide the lamp cage cover in the direction of the arrow (to the
close mark) on the back of the projector. Then turn on the MAIN
POWER switch.
close mark) on the back of the projector. Then turn on the MAIN
POWER switch.
7.
Press POWER ON on projector. LAMP
REPLACEMENT indicator flashes red. Then
press ENTER to reset lamp timer.
REPLACEMENT indicator flashes red. Then
press ENTER to reset lamp timer.
•
Press POWER ON, and then press ENTER on the
projector.
projector.
8.
Turn off the main power again and remove the lamp
cage cover.
cage cover.
Turn off the main power switch and slide the lamp cage cover in
the direction of the arrow (to the open mark) on the back of the
projector.
the direction of the arrow (to the open mark) on the back of the
projector.
Click on the first or last page to see other XG-V10WE service manuals if exist.