Read Sharp XG-V10WE Handy Guide online
Maintenance Procedure
Version 1.1
Issue 04/2006
Issue 04/2006
15
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Replacing the Air Filter
•
This projector is equipped with air
filters to ensure the optimal
operating condition of the projector.
filters to ensure the optimal
operating condition of the projector.
•
The air filters should be cleaned
every 100 hours of use. Clean the
filters more often when the projector
is used in a dusty or smoky location.
every 100 hours of use. Clean the
filters more often when the projector
is used in a dusty or smoky location.
•
Ask your nearest Sharp Authorised
Projector Dealer or Service Centre
to exchange the filter (PFILD0110CEZZ) when it is no longer possible to clean.
Projector Dealer or Service Centre
to exchange the filter (PFILD0110CEZZ) when it is no longer possible to clean.
1.
Turn off the power and disconnect the power cord.
•
Press “STANDBY”. Wait until the cooling fan stops.
2.
Remove the front filter cover.
•
Turn over the projector. Grab the tab and slide open the filter cover
in the direction of the arrow.
in the direction of the arrow.
3.
Remove the air filter.
•
Pick the air filter up with your fingers and lift it out of the filter cover.
Click on the first or last page to see other XG-V10WE service manuals if exist.