Read Sharp XG-P10XE (serv.man12) User Guide / Operation Manual online
32
Setup for Transferring Images
Selecting the Projector
Specify the projector model to which you will transfer images.
1
Click the “File” menu to select “Select Projector...”.
w
The
“Select Projector”
dialog box will open.
Select “XGP10X” if you are using the XG-P10X, “PGC30X” if you
are using the PG-C30X.
are using the PG-C30X.
2
Select the projector model for use and click “OK”.
For other models, select a projector from the screen.
Changing Connection Type
This menu is used to change the connection type. The port setting must
be made depending on which type you are going to use, infrared
communications or communications using RS-232C cable. The default
setting is “RS-232C”.
be made depending on which type you are going to use, infrared
communications or communications using RS-232C cable. The default
setting is “RS-232C”.
Gamma Correction
and
RS-232C Control
require
communications using RS-232C cable.
1
Click the “File” menu to select “RS-232C or Wireless
(IrCOM)...”.
(IrCOM)...”.
w
The
“RS-232C or Wireless (IrCOM)”
dialog box will open.
“Transmission Speed”
is changeable only for image transfer via
RS-232C.
2
Select “Com Status” according to your computer.
3
Select the connection type and click “OK”.
Click on the first or last page to see other XG-P10XE (serv.man12) service manuals if exist.