Read Sharp XG-P10XE (serv.man12) User Guide / Operation Manual online
29
Adjusting and
Controlling
3
When
“CUSTOM”
is selected
in box 2
, each of these colors except
“WHITE”
can be adjusted respectively. As you adjust
“WHITE”,
the
values of the other three colors will be offset.
The
“Reset & Transmit”
button resets the values of the color
currently selected. If you want to reset both the red and green
values, click the
values, click the
“Reset & Transmit”
button in the
“RED”
mode,
and then click the
“Reset & Transmit”
button again in the
“GREEN”
mode. If you want to reset to the original values, click
the
“Reset & Transmit”
button in the
“WHITE”
mode.
4
To send all the adjustment signals to the projector
5
To restore to the previous status after operating the gamma data.
6
To restore the status before the “UNDO” button was clicked.
7
Gamma coordinate display (OUTPUT/INPUT).
2
Select the “InputMode”.
3
Select “CUSTOM” or one of the other modes.
w When selecting the
“MOVIE”
,
“FAMILY”
,
“SNOW”
, or
“NIGHT”
mode, the
“NOW TRANSMITTING...”
message is displayed
during transmission.
4
When selecting “CUSTOM”, adjust the values of each color.
Drag and drop the curve of the graph to adjust it to the proper value.
5
Click “Transmit”.
w The
“NOW TRANSMITTING...”
message is displayed during
transmission.
Adjusting the Gamma curve
1
Repeat steps 1-4 of “Gamma Correction”.
2
Place the mouse pointer over the gamma curve.
The mouse pointer takes the shape of an open hand.
Click on the first or last page to see other XG-P10XE (serv.man12) service manuals if exist.