Read Sharp XG-NV2E (serv.man5) Service Manual online
4
XG-NV2U/E/M
SUPPLEMENT
Interconnecting 3:Production lot in February 1998 and on
Trouble spot
Preparations
Procedure
Fan Control PWB
Output sub-PWB
DUNTK9567DE
DUNTK9567DE
Output PWB
DUNTK9526DE
DUNTK9526DE
Fan Control PWB marked "A"
When replace with the Output sub-
PWB
PWB
√
:
QCNW-4981CEZZ cable
Both Output PWB
√
and
√
can be
used.
Replace Fan Control PWB marked "A".
Disconnect Output sub PWB and QCNW-5001CEZZ
cable, and connect QCNW-4981CEZZ cable to a new
Output sub PWB
cable, and connect QCNW-4981CEZZ cable to a new
Output sub PWB
√
.
Replace the Output PWB as it is.
Fan Control PWB (Display; S9661CE
√
,F0136AD
√
,
√
.)
QCNW-4980CEZZ
QCNW-5001CEZZ
Output sub PWB
√
1
0
2
2
When replace with the Output sub-PWB
√
, disconnect the defective PWB from QCNW-
5001CEZZ cable, and connect the new PWB.
4. Others
1
The replacement fan control PWB is marked "A" on its back. PWBs of this type are manufactured as from
February 1998 (redesigned to upgrade the standby mode when the main power is turned on).
February 1998 (redesigned to upgrade the standby mode when the main power is turned on).
2
The replacement QCNW-4980CEZZ cable has UL tape attached.
The UL tape is applied to prevent the cable from getting caught by the side panel-to-top panel screw-down
bracket. See below for the tape position.
The UL tape is applied to prevent the cable from getting caught by the side panel-to-top panel screw-down
bracket. See below for the tape position.
1 Brown
2 Brown
3 Brown
4 Brown
5 Brown
3 Brown
4 Brown
5 Brown
Brown 1
Brown 2
Brown 3
Brown 4
Brown 5
Brown 3
Brown 4
Brown 5
260
±
5
10
50
±
5
PHR-5
(2-mm-pitch
socket)
(2-mm-pitch
socket)
SMP-05V-NC
(2.5-mm-pitch
relay connector)
(2.5-mm-pitch
relay connector)
Output sub-PWB side
Fan Control PWB side
UL tape added here
2
2
1
1
1
Click on the first or last page to see other XG-NV2E (serv.man5) service manuals if exist.