PG-B10S (serv.man38). Lamp and fan problems - Sharp Projector Technical Bulletin (repair manual). Page 5

Read Sharp PG-B10S (serv.man38) Technical Bulletin online

PJR 2005 03 01
Date of Issue:          24
th
 March 2005
        
Classification:
White
PROJECTOR TECHNICAL BULLETIN
Page 5 of 5
Sharp Electronics (UK) Limited
Reference - LV-115
Revision  - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
 Red – Carry out on all units
Setting up after rewritting
After rewriting the software, it will be necessary to reset the language, eco mode etc.
1.  Connect the projector and the PC via a RS232 cross connection cable.
2.  Turn the projector on.
3.  Enter the factory mode (with the menu not displayed, press, up, up, down, down,
right, left and enter buttons in sequence).
4.  Reset data as noted down previously.
5.  Select VERSION and press the enter key.
6.  Check that the factory data has updated:
7.  Select SS and press SS3 EU for Europe.  DO NOT press SS2 as all data will be
erased,.
8.  Turn the projector off.
9.  Disconnect the RS232 cable.
10. Disconnect the power lead
Page of 5
Display

Download Sharp PG-B10S (serv.man38) Technical Bulletin