Read Sharp PG-B10S (serv.man10) Service Manual online
9
PG-B10S
Operation Manual
ON button
For turning the power on.
STANDBY button
For putting the projector into the
standby mode.
Power indicator
Lamp indicator
Temperature warning
indicator
KEYSTONE button
For entering the Keystone
Correction mode.
Correction mode.
Remote control
sensor
Zoom knob
INPUT button
For switching input mode
1, 2 or 3.
1, 2 or 3.
AUTO SYNC button
For automatically
adjusting images when
connected to a computer.
Volume buttons
For adjusting the speaker
sound level.
sound level.
Adjustment buttons
(
(
'"\ |
)
•
For selecting menu items.
•
For adjusting the Keystone
Correction when in the
Keystone Correction mode.
Correction when in the
Keystone Correction mode.
ENTER button
For setting items selected
or adjusted on the menu.
or adjusted on the menu.
MENU button
For displaying adjustment
and setting screens.
and setting screens.
Focus ring
Intake vent
Speaker
Lens shift lever
HEIGHT ADJUST button
Front adjustment foot
(on the bottom of
the projector)
Projector (Front and Top View)
Attaching and removing the lens cap
•
Press on the two buttons of the lens cap
and attach it to the lens, then release the
buttons to lock it in place.
and attach it to the lens, then release the
buttons to lock it in place.
•
Press on the two buttons of the lens cap
and remove it from the lens.
and remove it from the lens.
10
PG-B10S
About the Indicators on the Projector
Power indicator
Green on/Red on ... Normal
Red blinks ... Abnormal
Red blinks ... Abnormal
Temperature warning indicator
Off ... Normal
Red on ... The internal temperature is abnormally high.
Red on ... The internal temperature is abnormally high.
Lamp indicator
Green on ... Normal
Green blinks ... The lamp is warming up.
Red on ... Change the lamp.
Green blinks ... The lamp is warming up.
Red on ... Change the lamp.
Attaching and Removing the Lens Shipping Block
When attaching the lens shipping block, be sure to return the
lens shift lever to the center position. If the lens is shifted upward
or downward, the lens shipping block cannot be attached.
lens shift lever to the center position. If the lens is shifted upward
or downward, the lens shipping block cannot be attached.
11
PG-B10S
Projector (Rear View)
Using the Kensington Lock
•
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
Rear adjustment
foot
(on the bottom of
the projector)
foot
(on the bottom of
the projector)
AC socket
Exhaust vent
RGB OUTPUT
terminal
Terminal for
connecting a monitor.
INPUT 1 terminal
Terminal for
computer RGB and
component signals.
RS-232C terminal
Terminal for controlling
the projector using a
computer.
Kensington
Security Standard
connector
AUDIO INPUT
terminal
terminal
Shared audio input
terminal for INPUT
1, 2 and 3.
terminal for INPUT
1, 2 and 3.
INPUT 2 terminal
Terminal for
connecting video
equipment with an
S-video terminal.
connecting video
equipment with an
S-video terminal.
INPUT 3 terminal
Terminal for
connecting video
equipment.
connecting video
equipment.
12
PG-B10S
INPUT/OUTPUT Terminals and Connectable Main Equipment
INPUT 1 terminal
Connecting the computer.
(See page
(See page
51
.)
Connecting video equipment
with component output
terminal (DVD player, DTV
decoder, etc.).
with component output
terminal (DVD player, DTV
decoder, etc.).
RS-232C terminal
Connecting the
computer to control the
projector.
computer to control the
projector.
AUDIO INPUT terminal
Connecting an audio cable
(Shared audio input terminal
for INPUT 1, 2 and 3.)
(Shared audio input terminal
for INPUT 1, 2 and 3.)
RGB OUTPUT terminal
Connecting the monitor
when you want to
simultaneously watch the
projection image on the
monitor.
when you want to
simultaneously watch the
projection image on the
monitor.
INPUT 3 terminal
Connecting video equipment without
S-video output terminal.
S-video output terminal.
INPUT 2 terminal
Connecting video equipment with
S-video output terminal (VCR,
Laser disc player, etc.).
S-video output terminal (VCR,
Laser disc player, etc.).