Read Sharp PG-A20X Handy Guide online
Maintenance Procedure
Version 1.5
Issue 04/2006
Issue 04/2006
16
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
4. Clean the air filter.
•
Clean the dust off the air filter and cover with a vacuum cleaner
extension hose.
extension hose.
5. Replace the air filter.
•
Place the air filter underneath the tabs on the
filter/lamp unit cover.
filter/lamp unit cover.
6. Replace the filter/lamp unit cover.
•
Align the tab on the filter/lamp unit cover (1) and
place it while pressing the tab (2) to close it.
Then tighten the user service screw (3) to
secure the filter/ lamp unit cover.
place it while pressing the tab (2) to close it.
Then tighten the user service screw (3) to
secure the filter/ lamp unit cover.
Note
•
Be sure the filter/lamp unit cover is securely
installed. The power will not turn on unless it is
correctly installed.
installed. The power will not turn on unless it is
correctly installed.
•
If dust or dirt has collected inside the bottom air
filter (not removable), clean the filter with a
vacuum cleaner extension hose.
filter (not removable), clean the filter with a
vacuum cleaner extension hose.
Click on the first or last page to see other PG-A20X service manuals if exist.