Read Sharp MX-RBX1 (serv.man8) Service Manual online
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 8
(9) Feed Roller
1)
Remove the upper cover. (See A.(4).)
2)
Remove the upper right cover assembly. (See A.(6).)
3)
Remove the feed motor unit. (See B.(6).)
4)
Remove the screw [1].
5)
Remove the stop ring [2], and detach the bushing [3].
6)
Remove the two screws [4].
7)
Remove the gear [5], and detach the gear [6] while spreading
the claw.
the claw.
8)
Remove the stop ring [7], and detach the bushing [8].
9)
Remove the screw [9], and detach the inlet sensor [10].
10) Remove the lower paper guide [11].
11) Remove the feed roller [12].
(10) Stack Delivery Roller (Upper)
1)
Remove the paddle assembly. (See B.(4).)
2)
Place the paddle assembly [1] as shown.
3)
Turn the gear [2] in the direction of the arrow to move up the
stack delivery roller assembly (upper) [3].
stack delivery roller assembly (upper) [3].
4)
Push up the stack delivery roller (upper) [4] from below to free
the stack deliver roller (upper) [4] from the shaft [5].
the stack deliver roller (upper) [4] from the shaft [5].
[2]
[1] [3]
[4]
[11]
[9]
[10]
[7]
[6]
[8]
[5]
[12]
[1]
[3]
[2]
[4]
[5]
Click on the first or last page to see other MX-RBX1 (serv.man8) service manuals if exist.