Read Sharp MX-RBX1 (serv.man8) Service Manual online
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 7
(7) Staple/Fold Drive Unit
1)
Open the front door, and slide out the stapler unit slightly to the
front.
front.
2)
Remove the screw [3], and detach the interface retainer [4].
3)
Free the six harness retainers [5], and disconnect the connec-
tor [6].
tor [6].
4)
Free the harness [7] from the harness retainer [5].
5)
Free the harness [7] from the edge saddle [8]; then, disconnect
the two connectors [9].
the two connectors [9].
6)
Release the harness retainer [10], and disconnect the connec-
tor [11].
tor [11].
7)
Free the harness [12] from the harness retainer [10].
8)
Free the harness [12] for the edge saddle [13]; and disconnect
the two connectors [14].
the two connectors [14].
9)
Remove the screw [15], and free the claw [17] of the harness
guide from the long angle [16] of the base plate.
guide from the long angle [16] of the base plate.
10) Disconnect the two connectors [18], and free the harness [20]
from the edge saddle [19].
11) Remove the three screws [21].
12) Remove the screw [22], and detach the staple/fold drive unit
[23].
(8) Feed Motor Unit
1)
Remove the rear cover. (See A.(3).)
2)
Open the harness retainer [1], and disconnect the two connec-
tors [2].
tors [2].
3)
Remove the screw [3], and detach the harness guide [4].
4)
Remove the three screws [5], and detach the feed motor unit
[6].
[6].
1
2
[6]
[7]
[3]
[7]
[8]
[9]
[7]
[5]
[5]
[4] [5] [7] [5]
[12]
[11]
[10]
[13]
[14]
[17]
[15]
[16]
[18]
[18]
[19]
[20]
[21]
[21]
[21]
[22]
[23]
[5]
[5]
[3]
[4]
[6]
[1]
[2]
Click on the first or last page to see other MX-RBX1 (serv.man8) service manuals if exist.