Read Sharp MX-RBX1 (serv.man8) Service Manual online
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 6
5)
Disconnect the three connectors [7].
6)
Release the two claws [8] of the harness retainer, and detach
the motor harness [9].
the motor harness [9].
7)
Remove the stop ring [10], and detach the timing belt [11].
8)
Disconnect the connector [12], and free the harness [14] from
the edge saddle [13].
the edge saddle [13].
9)
Remove the two screws [15], and slide the processing tray
assembly [16] to the rear; then lift it to detach.
assembly [16] to the rear; then lift it to detach.
(6) Paddle Assembly
1)
Remove the processing tray assembly. (See B.(3).)
2)
Place the processing tray assembly [1] as shown.
NOTE: Be sure to take care not to damage the aligning plate
[2].
NOTE: Be sure to take care not to damage the aligning plate
[2].
3)
Detach the timing belt [3], and remove the two screws [4].
4)
Separate the processing tray assembly [5] and the paddle
assembly [6] as shown.
assembly [6] as shown.
[9]
[8]
[7]
[11]
[10]
[13]
[14]
[12]
[16]
[15]
[2]
[1]
[3]
[4]
[4]
[6]
[5]
Click on the first or last page to see other MX-RBX1 (serv.man8) service manuals if exist.