Read Sharp MX-RB18 Service Manual online
MX-RB18 DISASSEMBLY AND ASSEMBLY 6 - 1
[6] DISASSEMBLY AND ASSEMBLY
1. Each unit disassembly
A. Upper decurler unit
1)
Open the front door.
Remove the resin E-ring, and slide down the pin.
Remove the front door.
Remove the resin E-ring, and slide down the pin.
Remove the front door.
2)
Remove the screw, and remove the front cabinet.
3)
Remove the screw, and remove the magnet.
4)
Remove the screw, and remove the rear cabinet.
NOTE: When installing the rear cabinet, pass the harness
NOTE: When installing the rear cabinet, pass the harness
through the hole in the rear cabinet.
5)
Disconnect the connecter. Remove the harness from the
clamp, and remove the snap band.
clamp, and remove the snap band.
No.
Unit name
1
Upper decurler unit
2
Decurler unit control PWB
2
1
3
1
2
1
2
1
1
1
2
1
1
1
1
1
2
1
2
3
Click on the first or last page to see other MX-RB18 service manuals if exist.