Read Sharp MX-RB18 Service Manual online
MX-RB18 DISASSEMBLY AND ASSEMBLY 6 - 3
B. Decurler unit control PWB
1)
Remove the screw, and remove the rear cabinet.
NOTE: When installing the rear cabinet, pass the harness
NOTE: When installing the rear cabinet, pass the harness
through the hole in the rear cabinet.
2)
Remove the screw, and remove the plate.
3)
Disconnect the connector from the decurler unit control PWB.
Remove the screw and the supporter, and remove the decurler
unit control PWB.
Remove the screw and the supporter, and remove the decurler
unit control PWB.
2. Maintenance
A. Upper decurler roller, Upper decurler shaft
roller, Lower decurler roller, Lower decurler
shaft roller, Transport roller 1, Transport roller
2
shaft roller, Transport roller 1, Transport roller
2
1)
Open the front door, and open the upper decurler unit. Clean
the rollers.
the rollers.
B. Upper decurler roller
1)
Open the front door.
Remove the resin E-ring, and slide down the pin.
Remove the front door.
Remove the resin E-ring, and slide down the pin.
Remove the front door.
2)
Remove the screw, and remove the front cabinet.
1
1
1
1
2
1
1
2
2
1
1
3
1
3
2
1
1
1
1
1
3
1
2
1
2
1
1
1
Click on the first or last page to see other MX-RB18 service manuals if exist.