Read Sharp MX-RB18 Service Manual online
MX-RB18 DISASSEMBLY AND ASSEMBLY 6 - 4
3)
Remove the screw, and remove the front cabinet lower.
4)
Remove the E-ring, and remove the bearing.
Slide the upper decurler roller to rear frame side, and remove
the bearing from the frame.
Remove the upper decurler roller.
Slide the upper decurler roller to rear frame side, and remove
the bearing from the frame.
Remove the upper decurler roller.
NOTE: Keep the mylar sheet position on the right side of the
roller when attach the upper decurler roller.
NOTE: Set the pressure adjustment lever to the position “1”
when attach the upper decurler roller.
C. Lower decurler roller
1)
Open the front door.
Remove the resin E-ring, and slide down the pin.
Remove the front door.
Remove the resin E-ring, and slide down the pin.
Remove the front door.
2)
Remove the screw, and remove the front cabinet.
3)
Remove the screw, and remove the front cabinet lower.
4)
Remove the resin E-ring, and remove the bearing.
Remove the pressure release lever.
Remove the pressure release lever.
5)
Remove the E-ring, and remove the bearing.
Slide the lower decurler roller to rear frame side, and remove
the bearing from the frame.
Remove the lower decurler roller.
Slide the lower decurler roller to rear frame side, and remove
the bearing from the frame.
Remove the lower decurler roller.
NOTE: Set the pressure adjustment lever to the position "1"
when attach the lower decurler roller.
2
1
4
1
2
3
3
1
2
1
2
1
1
1
2
1
1
2
1
2
3
3
4
1
2
Click on the first or last page to see other MX-RB18 service manuals if exist.