Read Sharp MX-PEX2 (serv.man2) Service Manual online
88
Error codes and conditions
Printing (continued)
Pages come out blank,
or tinted with green
or some other color.
or tinted with green
or some other color.
Loose cable connection between
the Fiery X3eTY2 and the MFP
the Fiery X3eTY2 and the MFP
1. Recheck the MFP interface cable and connection at the
Fiery X3eTY2 and the MFP.
2. Power off/on the MFP.
3. Replace the MFP interface cable.
Problem with the MFP
Test the MFP and service, if necessary (see the service
documentation that accompanies the MFP).
documentation that accompanies the MFP).
If the user can print the Configuration page from the MFP Control Panel, but cannot print a job from a computer on the network,
request that the network administrator do the following:
request that the network administrator do the following:
• Check all components of the network, including cables, connectors, terminators, network adapter boards, and network drivers
• Activate the network and use it to communicate with other printers
• Confirm that the applicable network settings in Setup (such as AppleTalk zone, IP address, Subnet mask, and Gateway address)
match the settings used in the network
N
OTE
:
EPS file generation is not completely standardized among applications. Some users may encounter problems while printing
certain EPS files.
T
ABLE
B
Fiery X3eTY2 error codes and conditions (Continued)
Symptom
Possible cause
Suggested action
Click on the first or last page to see other MX-PEX2 (serv.man2) service manuals if exist.