HT-SL70 (serv.man2) - Sharp Audio User Guide / Operation Manual

11/5/4

HT-SL70_Front EA361UK.fm

9

1

7

6

5

4

3

2

1

9

HT-SL70 EA361

2011 May 5 

The mains lead of this product is fitted with plug
incorporating a 10A fuse. Should the fuse need to be
replaced, a BSI or ASTA approved BS 1362 fuse marked

 or 

 and of the same rating as above, which is also

indicated on the pin face of the plug must be used. 

Always refit the plug cover after replacing the fuse. Never
use the plug without the plug cover fitted. 

In the unlikely event of the socket outlet in your home not
being compatible with the plug supplied, cut-off the mains
plug and fit an appropriate type.

DANGER:
The fuse from the cut-off plug should be removed and the
cut-off plug destroyed immediately and disposed of in a
safe manner. 

Under no circumstances should the cut-off plug be
inserted elsewhere into a 13A socket outlet as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the
instructions below:

The wires in the mains lead are coloured in accordance
with the following code:

Blue    : Neutral

Brown : Live

As the colours of the wires in the mains lead of this product
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:

●

The wire which is coloured blue must be connected to
the plug terminal which is marked N or coloured black.

●

The wire which is coloured brown must be connected to
the plug terminal which is marked L or coloured red.

Ensure that neither the brown nor the blue wire is connect-
ed to the earth terminal in your three pin plug.

Before replacing the plug cover, make sure that:

●

If the new fitted plug contains a fuse, its value is the
same as that removed from the cut-off plug.

●

The cord grip is clamped over the sheath of the mains
lead and not simply over the lead wires.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.

In the unlikely event of your equipment requiring repair,
please contact the dealer or supplier from whom it was
purchased. Where this is not possible, please visit our
web-site www. sharp.co.uk/ customersupport.

Customers without internet access may telephone 0845
880 0512 during office hours (or (01) 676 0648 if telephon-
ing from lreland).

Please note; all calls will be charged at local rate.

Certain replacement parts and accessories may be ob-
tained from our main parts distributor.

WILLOW VALE ELECTRONICS LTD.

0121 766 5414

In the unlikely event of this equipment requiring repair
during the guarantee period, you will need to provide proof
of the date of purchase to the repairing company.

Please keep your invoice or receipt, which is supplied at
the time of purchase.

2011 May 5 

HT-SL70 EA361

●

During STAND-BY position, mains voltage is still
present inside the unit. When a signal is detected (e.g.
TV timer mode or OAD (Over Air Download)) at
STAND-BY position, the unit may be brought into
operation.

●

This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.

●

To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled with
liquids, such as vases, shall be placed on the
apparatus.

HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.

1. In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dustbin! 
Used electrical and electronic equipment must be
treated separately and in accordance with legislation
that requires proper treatment, recovery and recycling
of used electrical and electronic equipment.
Following the implementation by member states,
private households within the EU states may return
their used electrical and electronic equipment to
designated collection facilities free of charge*. 
In some countries* your local retailer may also take
back your old product free of charge if you purchase a
similar new one.
*)  Please contact your local authority for further
details.
If your used electrical or electronic equipment has
batteries or accumulators, please dispose of these
separately beforehand according to local
requirements.
By disposing of this product correctly you will help
ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent
potential negative effects on the environment and
human health which could otherwise arise due to
inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your
local authorities and ask for the correct method of
disposal.  
For Switzerland: Used electrical or electronic
equipment can be returned free of charge to the
dealer, even if you don't purchase a new product.
Further collection facilities are listed on the homepage
of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you
want to discard it:
Please contact your SHARP dealer who will inform you
about the take-back of the product. You might be
charged for the costs arising from take-back and
recycling. Small products (and small amounts) might
be taken back by your local collection facilities.
For Spain: Please contact the established collection
system or your local authority for take-back of your
used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact
your local authorities and ask for the correct method of
disposal.

Attention: 
Your 
product is 
marked 
with this 
symbol. It 
means that 
used 
electrical 
and 
electronic 
products 
should not 
be mixed 
with 
general 
household 
waste. 
There is a 
separate 
collection 
system for 
these 
products.

9

1

7

6

5

4

3

2

1

9

HT-SL70 EA361

2011 May 5 

●

This product is recommended for flat panel TV (LCD and plasma).

●

For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.

●

This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore 

for HDMI connection, your TV’s CEC must be enabled. For detail, refer to the operation manual of the TV.

●

For TV without HDMI CEC, headphone or RCA (variable output) analogue connection is available.

●

For TV without HDMI, headphone or RCA (variable output) connection is required.

●

This unit supports HDMI which enables ARC (Audio Return Channel).

The following accessories are included.

This product has no remote control.

HDMI 

(with ARC) 

MUST BE ENABLED

HDMI IN 

(ARC)

Page 10, Method 1

with HDMI

MUST BE ENABLED

HDMI IN

Page 10, Method 2

HDMI TV without 

CEC & ARC or non 

HDMI TV

NONE

HEADPHONE OUT

Page 11, Method 1

RCA 

(VARIABLE OUT)

Page 11, Method 2