MX-M905 (serv.man2). Service Manual (Revised May 2017). - Sharp Copying Equipment Service Manual (repair manual). Page 9

MX-M905  SPECIFICATIONS  2 – 2

*: Default 200X200dpi

Monochrome

Color

Scanning 
Resolution (dpi)

Platen

600 x 600dpi (default)
600 x 400dpi
600 x 300dpi

–

DSPF

600 x 600dpi
600 x 400dpi (default)
600 x 300dpi

–

Exposure lamp

White LED

Reading gradation

10bit 

Output gradation

BW: Binary (1bit)
Gray scale: 8bit
Full Color: each color RGB 8bit

Type

Document table fixed system (Flat bed)

Scanning area

297 x 432mm

Original standard 
position

Left top reference

Detection

Yes

Detection size

Automatic detection (One type of detection unit to 
be switched for software destination)

Dehumidifying 
heater (Scanner 
section)

Supplied as a service parts

Type

DSPF (Duplex single pass feeder)

Scan speed

Monochrome (A4/8.5" x 11")

Color (A4/8.5" x 11")

Copy

Single: 120 sheets/min. (600 x 300dpi, 8bit)
              90 sheets/min. (600 x 400dpi, 8bit)
              60 sheets/min. (600 x 600dpi, 8bit)
Duplex: 240 pages/min. (600 x 300dpi, 8bit)
             180 pages/min. (600 x 400dpi, 8bit)
             120 pages/min. (600 x 600dpi, 8bit)

N/A 

FAX

Single:  120 sheets/min. (200 x 200dpi, 1bit)
Double: 240 pages/min. (200 x 200dpi, 1bit)

N/A 

Internet FAX

Single:  120 sheets/min. (200 x 200dpi, 1bit)
Double: 240 pages/min. (200 x 200dpi, 1bit)

N/A 

Scanner*

Single:  120 sheets/min. (200 x 200dpi/300 x 300dpi, 1bit)
Double: 240 pages/min. (200 x 200dpi/300 x 300dpi, 1bit)

Single:  120 sheets/min. (200 x 200dpi/300 x 300dpi, 8bit)
Double: 240 pages/min. (200 x 200dpi/300 x 300dpi, 8bit)

Original setup direction

Upward standard (1 to N feeding standard)

Original standard position

Center standard (Rear one-side standard for random feeding)

Original transport method

Sheets-through method

Original size

Standard size
Inch-1: 11" x 17", 8.5" x 14", 8.5" x 11", 8.5" x 11"R, 5.5" x 8.5", 5.5" x 8.5"R, A3, B4, A4, B5, B5R
Inch-2: 11" x 17", 8.5" x 13", 8.5" x 11", 8.5" x 11"R, 5.5" x 8.5", 5.5" x 8.5"R, A3, B4, A4, B5, B5R
Inch-3: 11" x 17", 8.5" x 13.4", 8.5" x 11", 8.5" x 11"R, 5.5" x 8.5", 5.5" x 8.5R", A3, B4, A4, B5, B5R
AB-1: 11" x 17", 8.5" x 14", 8.5" x 11", A3, B4, A4, A4R, B5, B5R, A5, A5R
AB-2: 11" x 17", 8.5" x 13", 8.5" x 11", A3, B4, A4, A4R, B5, B5R, A5, A5R
AB-3: 11" x 17", 8.5" x 13", 8.5" x 11", A3, B4, A4, A4R, B5, B5R, A5, A5R, 8K, 16K, 16KR
AB-4: 11" x 17", 8.5" x 13.4", 8.5" x 11", A3, B4, A4, A4R, B5, B5R, A5, A5R
AB-5: 11" x 17", 8.5" x 13.5", 8.5" x 11", A3, B4, A4, A4R, B5, B5R, A5, A5R

Long paper
1000 mm (Monochrome binary only)

Mix paper feed 
(Same series, same width paper)

Enabled

Random feeding (feeding of 
different types / different widths) 

Enabled 
Only the following combinations of 2 size types are allowed: 
A3 and B4; B4 and A4R; A4 and B5; B5 and A5; and 11-inch and 8.5-inch. AMS available.

Original copy weight

Single: 
Thin paper: 9 - 13 lb bond (35 - 49 g/m

2

)

Plain paper: 13 lb bond - 110 lb index (50 - 205 g/m

2

)

* Thin paper mode (70-sheets/min. (A4, 8.5" x 11")) is set up for the thin paper.
Duplex: 13 - 110 lb bond (52 - 205 g/m

2

)

Max. loading capacity of documents

Max. 250-sheets (80g/m

2

, 20 lbs bond), or max. 32.5mm (1-9/32 inch)  of the document load height. 

Un-acceptable originals for feeding.

OHP, second original paper, tracing paper, carbon paper, thermal paper, paper with wrinkles, folds, or breakage, 
pasted paper, cutout document, document printed with ink ribbon, documents with perforation other than 2- or 3-holes 
(Perforated document by punch unit is allowed.)

Detection

Yes

Paper detection size

Auto detection (Refer to “Original size”)

Paper feeding direction

Right hand feeding

Finish stamp

Option