MX-M905 (serv.man2). Service Manual (Revised May 2017). - Sharp Copying Equipment Service Manual (repair manual). Page 5

MX-M905  NOTE FOR SERVICING   - ii

3)

An electro-static type copier will produce ozone inside it.

The quantity of ozone produced is designed to a low level so
as not to affect human bodies. However, continuous use of
such a machine may produce a smell of ozone. Install the
machine in a well ventilated place, and ventilate occasionally.

When using special paper such as glossy paper, unique smell
or gas may be generated. Provide an additional duct to
exhaust the smell and gas from the exhaust section of the
machine as needed.  (There is no setting for the exclusive-use
duct.)

4)

Plastic parts and ink may be deformed, discolored, or may
undergo qualitative change.

It may cause a breakdown or copy dirt.

5)

The organic photoconductor (OPC) drum used in the machine
may undergo qualitative change due to organic gases such as
ammonium.

Installation of this machine near a diazo-type copier may result
in dirt copy.

6)

When dusts enter the machine, it may cause a breakdown or
copy dirt.

7)

Some machine require intake and exhaust of air.

If intake and exhaust of air are not properly performed, copy
dirt or a breakdown may be resulted.

When installing the machine, make sure that the sides and
back of the machine are at least 11-13/16" (30 cm) away from
any walls.

There is a portion currently expressed with the illustration of a con-
ventional model in this manual.

11-13/16"
(30 cm)

11-13/16"
(30 cm)

11-13/16"

(30 cm)