Read Sharp MX-M905 (serv.man2) Service Manual online
MX-M905 SPECIFICATIONS 2 – 6
Supported application when wireless LAN is connected
*1: Communications which are supported by the other cable communication are also supported at the infrastructure mode.
L. Memory/Hard disk
*1: The capacities are varied depending on the procurement situa-
tion.
tion.
M. Warm-up time
*1: Result may change depending on conditions.
*2: Conditions: Leave the machine for 60 sec. after door open,
standard condition, Polygon stops.
Type
Application Name
Destination
MFP Wireless LAN Mode
Remarks
Overseas
Infrastructure
Mode*
Access Point
Mode
Main Unit
Native
Function
Native
Function
*1
Print (LPD / Raw / IPP / IPP-SSL / FTP Push)
Yes
Yes
Yes
Scan (Scan to FTP/SMB)
Yes
Yes
Yes
Embedded Web browsing
Yes
Yes
Yes
Remote Operation Panel
Yes
Yes
Yes
SMB Server Function
Yes
Yes
Yes
mDNS Communication
Yes
Yes
Yes
Application
SharpAccountant Pro
No
No
No
Sharp Print System
No
No
No
SharpAccountant Lite
No
No
No
Under discussion
Sharp Remote Device Manager (SRDM)
Yes
No
No
• It has been described in the service
information that SRDM is not
supported.
supported.
• Because the session is shut out when
a processing with large volume
communication data (F/W update,
Device Cloning etc.) cannot complete
processing within the period until the
timeout of the main unit.
communication data (F/W update,
Device Cloning etc.) cannot complete
processing within the period until the
timeout of the main unit.
Network Scan Tool (Including Lite)
Yes
Yes
No
OSA-NST
N/A
N/A
N/A
All OSA series application
Yes
Yes
No
The interface of OSA should be available
from the infrastructure mode.
from the infrastructure mode.
Sharpdesk Mobile
Yes
Yes
Yes
Cloud
Service
Service
Sharpdesk Online
No
Yes*
No
* But it requires a network connection
which can connect to external internet.
Cloud Portal (Old Name: Clouddesk)
Yes
Yes*
No
* But it requires a network connection
which can connect to external internet.
Flash DIMM
mSATA
SSD
Memory
HDD
*1
ICU
main
(REUS1)
ICU sub
(REUS2)
SOC
REUS1
On
board
REUS2
On
board
SOC
On
board
2.5”
16MB
2MB
16GB
1GB
1GB
4GB
1TB
Memory area
(SSD)
(SSD)
Boot/Program area
FAX data storage area
1GB
1GB
Warm-up time *
1
(Time for the operation panel to be ready for
printing from turning on the power switch)
printing from turning on the power switch)
210sec.
Pre heat
Yes
Jam recovery time *
2
30 sec. or less
Click on the first or last page to see other MX-M905 (serv.man2) service manuals if exist.