Read Sharp MX-M905 (serv.man2) Service Manual online
MX-M905 ADJUSTMENTS 5 – 80
13-E
Image density and gradation adjustment in
the FAX send mode (Ultra fine mode)
the FAX send mode (Ultra fine mode)
1)
Enter the Sim. 46-44 mode.
2)
Select a mode to be adjusted with the scroll button.
3)
Press [EXECUTE] button.
The adjustment pattern is printed.
4)
Check the print density of the adjustment pattern.
If the print density of the adjustment pattern is unsatisfactory,
perform the following procedure.
perform the following procedure.
5)
Enter the adjustment value with 10-key, and press [OK] button.
When the adjustment value is increased, the image density is
increased. When the adjustment value is decreased, the
image density is decreased.
When the adjustment value is increased, the image density is
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 3 thru 5 until a satisfactory result is
obtained.
obtained.
To select the exposure mode actually used in the FAX send
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button.
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button.
Enter the adjustment value with 10-key, and press [EXECUTE]
button.
button.
13-F
Image density and gradation adjustment in
the IFAX send mode (600dpi mode)
the IFAX send mode (600dpi mode)
1)
Enter the Sim. 46-45 mode.
2)
Select a mode to be adjusted with the scroll button.
3)
Press [EXECUTE] button.
The adjustment pattern is printed.
4)
Check the print density of the adjustment pattern.
If the print density of the adjustment pattern is unsatisfactory,
perform the following procedure.
perform the following procedure.
5)
Enter the adjustment value with 10-key, and press [OK] button.
When the adjustment value is increased, the image density is
increased. When the adjustment value is decreased, the
image density is decreased.
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 3 thru 5 until a satisfactory result is
obtained.
obtained.
To select the exposure mode actually used in the FAX send
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button.
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button.
Display/Item
Content
Setting
range
Default
A
AUTO
FAX auto exposure mode
send image density
(Ultra fine mode)
send image density
(Ultra fine mode)
1 - 99
50
B
EXPOSURE1
FAX exposure level 1 send
image density
(Ultra fine mode)
image density
(Ultra fine mode)
1 - 99
50
C
EXPOSURE2
FAX exposure level 2 send
image density
(Ultra fine mode)
image density
(Ultra fine mode)
1 - 99
50
D
EXPOSURE3
FAX exposure level 3 send
image density
(Ultra fine mode)
image density
(Ultra fine mode)
1 - 99
50
E
EXPOSURE4
FAX exposure level 4 send
image density
(Ultra fine mode)
image density
(Ultra fine mode)
1 - 99
50
F
EXPOSURE5
FAX exposure level 5 send
image density
(Ultra fine mode)
image density
(Ultra fine mode)
1 - 99
50
G
AUTO
H_TONE
H_TONE
FAX auto exposure mode
send image density
(Half-tone/Ultra fine mode)
send image density
(Half-tone/Ultra fine mode)
1 - 99
50
H
EXPOSURE1
H_TONE
H_TONE
FAX exposure level 1 send
image density
(Half-tone/Ultra fine mode)
image density
(Half-tone/Ultra fine mode)
1 - 99
50
I
EXPOSURE2
H_TONE
H_TONE
FAX exposure level 2 send
image density
(Half-tone/Ultra fine mode)
image density
(Half-tone/Ultra fine mode)
1 - 99
50
J
EXPOSURE3
H_TONE
H_TONE
FAX exposure level 3 send
image density
(Half-tone/Ultra fine mode)
image density
(Half-tone/Ultra fine mode)
1 - 99
50
K
EXPOSURE4
H_TONE
H_TONE
FAX exposure level 4 send
image density
(Half-tone/Ultra fine mode)
image density
(Half-tone/Ultra fine mode)
1 - 99
50
L
EXPOSURE5
H_TONE
H_TONE
FAX exposure level 5 send
image density
(Half-tone/Ultra fine mode)
image density
(Half-tone/Ultra fine mode)
1 - 99
50
M EXECUTE
MODE
AUTO
1
1
(AUTO)
EXP1
2
EXP2
3
EXP3
4
EXP4
5
EXP5
6
AUTO H_TONE
7
EXP1 H_TONE
8
EXP2 H_TONE
9
EXP3 H_TONE
10
EXP4 H_TONE
11
EXP5 H_TONE
12
Display/Item
Content
Setting
range
Default
A
AUTO
IFAX 600dpi mode/
Auto exposure mode send
image density
Auto exposure mode send
image density
1 - 99
50
B
EXPOSURE1
IFAX 600dpi mode/Exposure
level 1 send image density
level 1 send image density
1 - 99
50
C
EXPOSURE2
IFAX 600dpi mode/Exposure
level 2 send image density
level 2 send image density
1 - 99
50
D
EXPOSURE3
IFAX 600dpi mode/Exposure
level 3 send image density
level 3 send image density
1 - 99
50
E
EXPOSURE4
IFAX 600dpi mode/Exposure
level 4 send image density
level 4 send image density
1 - 99
50
F
EXPOSURE5
IFAX 600dpi mode/Exposure
level 5 send image density
level 5 send image density
1 - 99
50
G
AUTO
H_TONE
H_TONE
IFAX 600dpi half-tone mode/
Auto exposure mode send
image density
Auto exposure mode send
image density
1 - 99
50
H
EXPOSURE1
H_TONE
H_TONE
IFAX 600dpi half-tone mode/
Exposure level 1 send image
density
Exposure level 1 send image
density
1 - 99
50
I
EXPOSURE2
H_TONE
H_TONE
IFAX 600dpi half-tone mode/
Exposure level 2 send image
density
Exposure level 2 send image
density
1 - 99
50
J
EXPOSURE3
H_TONE
H_TONE
IFAX 600dpi half-tone mode/
Exposure level 3 send image
density
Exposure level 3 send image
density
1 - 99
50
K
EXPOSURE4
H_TONE
H_TONE
IFAX 600dpi half-tone mode/
Exposure level 4 send image
density
Exposure level 4 send image
density
1 - 99
50
L
EXPOSURE5
H_TONE
H_TONE
IFAX 600dpi half-tone mode/
Exposure level 5 send image
density
Exposure level 5 send image
density
1 - 99
50
M EXECUTE
MODE
AUTO
1
1
(AUTO)
EXP1
2
EXP2
3
EXP3
4
EXP4
5
EXP5
6
AUTO H_TONE
7
EXP1 H_TONE
8
EXP2 H_TONE
9
EXP3 H_TONE
10
EXP4 H_TONE
11
EXP5 H_TONE
12
Click on the first or last page to see other MX-M905 (serv.man2) service manuals if exist.