Read Sharp MX-M905 (serv.man2) Service Manual online
MX-M905 ADJUSTMENTS 5 – 79
13-C
Image density and gradation adjustment in
the FAX send mode (Fine mode)
the FAX send mode (Fine mode)
1)
Enter the Sim. 46-42 mode, and select the I-FAX or FAX.
2)
Select a mode to be adjusted with the scroll button.
3)
Press [EXECUTE] button.
The adjustment pattern is printed.
4)
Check the print density of the adjustment pattern.
If the print density of the adjustment pattern is unsatisfactory,
perform the following procedure.
If the print density of the adjustment pattern is unsatisfactory,
perform the following procedure.
5)
Enter the adjustment value with 10-key, and press [OK] button.
When the adjustment value is increased, the image density is
increased. When the adjustment value is decreased, the
image density is decreased.
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 3 thru 5 until a satisfactory result is
obtained.
obtained.
To select the exposure mode actually used in the FAX send
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button
13-D
Image density and gradation adjustment in
the FAX send mode (Super fine mode)
the FAX send mode (Super fine mode)
1)
Enter the Sim. 46-43 mode.
2)
Select a mode to be adjusted with the scroll button.
3)
Press [EXECUTE] button.
The adjustment pattern is printed.
4)
Check the print density of the adjustment pattern.
If the print density of the adjustment pattern is unsatisfactory,
perform the following procedure.
perform the following procedure.
5)
Enter the adjustment value with 10-key, and press [OK] button.
When the adjustment value is increased, the image density is
increased. When the adjustment value is decreased, the
image density is decreased.
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 3 thru 5 until a satisfactory result is
obtained.
obtained.
To select the exposure mode actually used in the FAX send
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button.
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button.
Display/Item
Content
Setting
range
Default
A
AUTO
FAX auto exposure mode
send image density
(Fine mode)
send image density
(Fine mode)
1 - 99
50
B
EXPOSURE1
FAX exposure level 1 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
C
EXPOSURE2
FAX exposure level 2 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
D
EXPOSURE3
FAX exposure level 3 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
E
EXPOSURE4
FAX exposure level 4 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
F
EXPOSURE5
FAX exposure level 5 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
G
AUTO
H_TONE
H_TONE
FAX auto exposure mode
send image density
(Half-tone/Fine mode)
send image density
(Half-tone/Fine mode)
1 - 99
50
H
EXPOSURE1
H_TONE
H_TONE
FAX exposure level 1 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
I
EXPOSURE2
H_TONE
H_TONE
FAX exposure level 2 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
J
EXPOSURE3
H_TONE
H_TONE
FAX exposure level 3 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
K
EXPOSURE4
H_TONE
H_TONE
FAX exposure level 4 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
L
EXPOSURE5
H_TONE
H_TONE
FAX exposure level 5 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
M EXECUTE
MODE
AUTO
1
1
(AUTO)
EXP1
2
EXP2
3
EXP3
4
EXP4
5
EXP5
6
AUTO H_TONE
7
EXP1 H_TONE
8
EXP2 H_TONE
9
EXP3 H_TONE
10
EXP4 H_TONE
11
EXP5 H_TONE
12
Display/Item
Content
Setting
range
Default
A
AUTO
FAX auto mode send image
density (Super fine mode)
density (Super fine mode)
1 - 99
50
B
EXPOSURE1
FAX exposure level 1 send
image density
(Super fine mode)
image density
(Super fine mode)
1 - 99
50
C
EXPOSURE2
FAX exposure level 2 send
image density
(Super fine mode)
image density
(Super fine mode)
1 - 99
50
D
EXPOSURE3
FAX exposure level 3 send
image density
(Super fine mode)
image density
(Super fine mode)
1 - 99
50
E
EXPOSURE4
FAX exposure level 4 send
image density
(Super fine mode)
image density
(Super fine mode)
1 - 99
50
F
EXPOSURE5
FAX exposure level 5 send
image density
(Super fine mode)
image density
(Super fine mode)
1 - 99
50
G
AUTO
H_TONE
H_TONE
FAX auto exposure mode
send image density
(Half-tone/Super fine mode)
send image density
(Half-tone/Super fine mode)
1 - 99
50
H
EXPOSURE1
H_TONE
H_TONE
FAX exposure level 1 send
image density
(Half-tone/Super fine mode)
image density
(Half-tone/Super fine mode)
1 - 99
50
I
EXPOSURE2
H_TONE
H_TONE
FAX exposure level 2 send
image density
(Half-tone/Super fine mode)
image density
(Half-tone/Super fine mode)
1 - 99
50
J
EXPOSURE3
H_TONE
H_TONE
FAX exposure level 3 send
image density
(Half-tone/Super fine mode)
image density
(Half-tone/Super fine mode)
1 - 99
50
K
EXPOSURE4
H_TONE
H_TONE
FAX exposure level 4 send
image density
(Half-tone/Super fine mode)
image density
(Half-tone/Super fine mode)
1 - 99
50
L
EXPOSURE5
H_TONE
H_TONE
FAX exposure level 5 send
image density
(Half-tone/Super fine mode)
image density
(Half-tone/Super fine mode)
1 - 99
50
M EXECUTE
MODE
AUTO
1
1
(AUTO)
EXP1
2
EXP2
3
EXP3
4
EXP4
5
EXP5
6
AUTO H_TONE
7
EXP1 H_TONE
8
EXP2 H_TONE
9
EXP3 H_TONE
10
EXP4 H_TONE
11
EXP5 H_TONE
12
Click on the first or last page to see other MX-M905 (serv.man2) service manuals if exist.