Read Sharp MX-M904 / MX-M1204 (serv.man9) Service Manual online
MX-M1204 MX-FD10 (FOLDING UNIT) 17 – 5
E. Caster height adjustment
When the height of the paper folding unit is adjusted, execute the
caster roller height adjustment in the folder section according to the
following procedures.
caster roller height adjustment in the folder section according to the
following procedures.
1)
Open the front upper cover, pull out the folder section, remove
the screws, and remove the front cover of the folder section.
the screws, and remove the front cover of the folder section.
2)
Return the folder section to the inside of the machine. Loosen
the screws, and turn the adjuster bolt to adjust the height so
that the clearance between the caster roller and the floor is
about 1mm. After completion of the adjustment, tighten the
screw to fix.
the screws, and turn the adjuster bolt to adjust the height so
that the clearance between the caster roller and the floor is
about 1mm. After completion of the adjustment, tighten the
screw to fix.
F. Cables attachment
1)
Connect the communication cables from the folding unit to the
finisher. Fix it with the screw (Packed items No.7).
finisher. Fix it with the screw (Packed items No.7).
2)
Remove the inlet cover of the finisher, and connect the power
relay cable (Packed items No.3).
relay cable (Packed items No.3).
G. Earth connection when the MX-CF11 is
installed to the right side of the MX-FD10
1)
Connect the paper folding unit and the connection unit with the
shunt cable (Packed items No.8). Use the screw (Packed
items No.4).
shunt cable (Packed items No.8). Use the screw (Packed
items No.4).
[1]
[2]
About 1mm
B
A
[1]
[2]
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man9) service manuals if exist.