Read Sharp MX-M904 / MX-M1204 (serv.man9) Service Manual online
MX-M1204 MX-FD10 (FOLDING UNIT) 17 – 3
2)
Fix the paper guide A (bundled with the decurler unit No.11)
and the protection Mylar (bundled with the decurler unit No.14)
together to the decurler unit with the screws (bundled with the
decurler unit No.1).
and the protection Mylar (bundled with the decurler unit No.14)
together to the decurler unit with the screws (bundled with the
decurler unit No.1).
MEMO: Temporarily attach the protection sheet to the decurler
unit with the duplex tape (back of the protection sheet), then fix
it with the screw.
unit with the duplex tape (back of the protection sheet), then fix
it with the screw.
Connection unit: MX-CF11 (Inserter)
1)
Fix the connection plates F/R (bundled with the inserter No.4,
5) and the connection pin (Packed items No.6) to the inserter
with the screws (Packed items No.4).
5) and the connection pin (Packed items No.6) to the inserter
with the screws (Packed items No.4).
Connection unit: MX-ST10 (Stacker) (MX-FN22 only)
1)
Fix the connection plates F/R (Packed items No.5) and the
connection pins to the stacker with the screws (Packed items
No.4).
connection pins to the stacker with the screws (Packed items
No.4).
2)
Attach the paper guide B (bundled with the decurler unit
No.12) to the stacker with the screws (bundled with the
decurler unit No.1).
No.12) to the stacker with the screws (bundled with the
decurler unit No.1).
B. Paper folding unit connection
1)
Connect the unit to the decurler unit.
Insert the pin in the decurler unit side into the hole in the unit.
Insert the pin in the decurler unit side into the hole in the unit.
2)
Open the front upper cover, remove the screw and put down
the lock lever. Tighten the removed screw to fix the lock lever.
the lock lever. Tighten the removed screw to fix the lock lever.
TopPage
3
: ‘13/Oct
3
8
: ‘17/Apr.
8
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man9) service manuals if exist.