Read Sharp MX-M904 / MX-M1204 (serv.man9) Service Manual online
MX-M1204 MX-FD10 (FOLDING UNIT) 17 – 4
C. Height adjustment
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased.
height is decreased. When turned clockwise, the height is
increased.
MEMO: The specification of the height adjustment is as follows.
Height: The difference of level between top surface of the adjacent
device is within
device is within
1)
Open the front upper cover, pull out the folder section, and
remove the wrench from the front cover of the folder section.
remove the wrench from the front cover of the folder section.
2)
Turn the adjuster bolt of the caster (connection unit side) on
the front side to adjust the height.
the front side to adjust the height.
3)
Turn the adjuster bolt of the caster (connection unit side) on
the rear side to adjust the height.
the rear side to adjust the height.
D. Tilt adjustment
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased.
height is decreased. When turned clockwise, the height is
increased.
MEMO: The specification of the tilt adjustment is as follows.
Tilt: The difference of clearance between upper and lower part of
the adjacent device is within
the adjacent device is within
1)
Turn the adjuster bolt of the caster (paper exit side) on the
front side to adjust the height.
front side to adjust the height.
2)
Turn the adjuster bolt of the caster (paper exit side) on the rear
side to adjust the height.
side to adjust the height.
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[2]
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man9) service manuals if exist.