Read Sharp MX-M904 / MX-M1204 (serv.man9) Service Manual online
MX-M1204 MX-RB13 (RELAY UNIT) 16 – 3
2)
Fix the latch receivers F/R (Packed items No.4, 5) with the
screws (Packed items No.2).
screws (Packed items No.2).
When attached to the MX-CF11
When attached to the MX-ST10
F. Paper guide D installation
1)
Attach the Black Mylar (bundled with the inserter No.10) to the
paper guide D (Packed items No.9).
paper guide D (Packed items No.9).
Attach the Black Mylar to the downstream side of the paper
guide.
guide.
Attachment reference
Attach to the notch in the rear side as the reference.
2)
Fix the paper guide D (Packed items No.9) to the paper feed
side of the relay unit with the screws (Packed items No.1).
side of the relay unit with the screws (Packed items No.1).
G. Connection with the inserter or stacker
1)
Open the front cover of the relay unit, remove the screws and
pull the lock lever toward you.
pull the lock lever toward you.
2)
Connect the relay unit to the inserter or stacker.
Insert the pin of the latch receiver into the hole in the relay unit.
Insert the pin of the latch receiver into the hole in the relay unit.
Photo viewed from the R side
3)
Push up the lock lever to fix the relay unit and the inserter or
stacker, and use the removed screw to fix the lock lever.
stacker, and use the removed screw to fix the lock lever.
MEMO: If they cannot be locked, follow the installing proce-
dures (height adjustment) of the complex machine and options
to adjust the height.
dures (height adjustment) of the complex machine and options
to adjust the height.
R side
Black Mylar
Notch
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man9) service manuals if exist.