MX-M850 (serv.man37). Section 7 Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 7

MX-M1100  SIMULATION  7 – 7

62

1

Used to format the hard disk. (Except for the operation manual area.)

2

Used to check the read/write operation of the hard disk. (Partial section)

Operation test/check

3

Used to check the read/write operation of the hard disk. (All area)

Operation test/check

6

Used to perform the self diag of the hard disk.

Operation test/check

7

Used to print the self diag error log of the hard disk.

Operation test/check

8

Used to format the hard disk. (Except for the system area and the operation manual area.)

10

Used to delete the job log data.

Data clear

11

Used to delete the document filing data.

Data clear

12

Used to set YES/NO of auto format in hard disk trouble.

Setting

13

Used to format the hard disk.(Operation manual area only).

63

1

Used to check the result of the shading correction.

Adjustment/ Setting/ 
Operation data check

2

Used to execute shading forcibly.

Scanner

Adjustment/ Setting

3

Used to perform the gamma correction and density conversion for RGB data inputted from the 
CCD.  The gamma correction 1 of the SCAN ASIC and the set value of color correction are 
calculated and set from the specified image data.

Scanner

Adjustment/ Setting

4

The average value of the patch scan values for the RGB image data inputted from the CCD are 
calculated and displayed.

Scanner

Adjustment/ Setting

5

Used to reset the color balance of the scanner to the default.

Adjustment/ Setting

6

Used to set the auto adjustment pattern of the engine and color balance.

Adjustment/ Setting

7

Used to set the auto density of the engine auto adjustment scanner target value. (Service)

Adjustment/ Setting

8

Used to reset the engine auto adjustment scanner target value to the default value.

Adjustment/ Setting

64

2

Self print (B/W mode)

Operation test / check

3

Self print (B/W mode: high speed process)

Operation test/check

4

Used to make the self print of the printer.

Operation test/check

5

Printer self print (PCL)

Operation test/check

6

Printer self print (PS)

Operation test/check

65

1

Used to adjust the detection position of the touch panel (LCD display section).

Operation panel 
section

Adjustment

2

Used to check the result of the touch panel (LCD display section) detection position adjustment.

Operation panel 
section

Operation check/Test

5

Used to check the key input of the operation panel.

Operation panel 
section

Operation check/Test

66

1

Used to change and check the soft switch setting.

Setting

2

Used to clear the soft switch and set the default value.

FAX

Data clear

3

Used to check the operation (read/write) of the FAX PWB memory. 

FAX

Operation test, check

4

Used to check the output operation (MODEM operation) of data signal in each data output mode 
of FAX. Send level: MAX

FAX

Operation test, check

5

Used to check the output operation of data signal in each data output mode of FAX(MODEM 
operation). Send level: Soft switch setting

FAX

Operation test, check

6

Used to print the confidential pass code.

FAX

User data output, 
check

7

Used to output the image memory data (memory send and receive).* The confidential receive 
contents are also outputted.

FAX

User data output, 
check

8

Used to check the output operation (audio output IC operation check) of the various audio signals 
of FAX. Send level: MAX

FAX

Operation test, check

9

Used to check the output operation of various audio signals of FAX (audio output IC operation). 
Send level: Soft switch setting

FAX

Operation test, check

10

Used to clear all the data (memory receive and send) of the image memory.* The confidential 
receive data are cleared simultaneously.

FAX

Data clear

11

Used to check the output operation in the FAX G3 mode 300bps (MODEM operation). Send 
level: MAX

FAX

Operation test, check

12

Used to check the output operation (MODEM operation) in the FAX G3 mode 300bps. Send 
level: Set with the soft switch.

FAX

Operation test, check

13

Used to set the number for the FAX dial signal output test. (In the dial signal output test with 
Sim. 66-14 - 16, the dial number set with this simulation is outputted.)

FAX

Setting

14

Used to set the make time in the FAX pulse dial mode (10PPS) and to execute the dial signal 
output test. (The signal of the dial number set with Sim. 66-13 is outputted.)

FAX

Setting/Operation 
test, check

15

Used to set the make time in the FAX pulse dial mode (20PPS) and to execute the dial signal 
output test. (The signal of the dial number set with Sim. 66-13  is outputted.)

FAX

Setting/Operation 
test, check

16

Used to perform the dial signal (DTMF) output test in the FAX tone dial mode. (The signal of the 
dial number set with Sim. 66-13 is outputted.) The send level can be set to an optional level.

FAX

Setting/Operation 
test, check

17

Used to perform the dial signal (DTMF) output test in the FAX tone dial mode. Send level: MAX

FAX

Operation test, check

18

Used to perform the dial signal (DTMF) output test in the FAX tone dial mode. Send level: Set 
with the soft switch.

FAX

Operation test, check

21

Used to print information abut FAX (various registrations, communication management, file 
management, system errors, protocols).

FAX

Adjustment, setting, 
operation data check

22

Used to adjust the handset sound volume

Adjustment/ Setting

24

Used to clear the FAST memory data.

FAX

Clear

25

Used to register a FAX number for MODEM dial-in.

FAX

Setting

26

Used to register an external telephone number for MODEM dial-in.

FAX

Setting