MX-M850 (serv.man37). Section 7 Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 4

MX-M1100  SIMULATION  7 – 4

22

1

Used to check the print count value of each section and each operation mode. 
(Used to check the maintenance timing.)

Adjustment, setting, 
operation data output 
and check

2

Used to check the total number of misfeed and trouble. 
(If the total number of JAM is considerably great, it is judged that repair is required.)

Adjustment/ Setting/ 
Operation data check

3

Used to check the misfeed position and the number of misfeed. 
* This data can be used to estimate the trouble position.

Adjustment/ Setting/ 
Operation data check

4

Used to check the trouble (self diag) history.

Adjustment/ Setting/ 
Operation data check

5

Used to check the ROM version of each unit (section).

Other

6

Used to output the list of various setting and adjustment data 
(simulation, FAX soft switch, counter).

Adjustment/ Setting/ 
Operation data check

8

Used to check the counter value of the finisher, DSPF, and the scan (reading).

Adjustment/ Setting/ 
Operation data check

9

Used to check the use quantity (print quantity) of each paper feed section.

Paper feed, ADU, 
LCC

Adjustment/ Setting/ 
Operation data check

10

Used to check the system configuration (option, internal hardware).

Adjustment/ Setting/ 
Operation data check

11

Used to check the use frequency (send/receive) of FAX. (Only when FAX is installed.)

FAX 

Adjustment/ Setting/ 
Operation data check

12

Used to check the  DSPF misfeed position and the number of each misfeed. (If the number of 
misfeed is considerably great, it is judged that repair is required.)

DSPF Adjustment/ 

Setting/ 

Operation data check

13

Used to check the operating time of the process section (OPC drum, DV unit, toner bottle).

Adjustment/ Setting/ 
Operation data check

19

Used to check the various scanner counters related to the network scanner.

Adjustment/ Setting/ 
Operation data check

90

Used to output the various setting data.

Adjustment/ Setting/ 
Operation data check

23

2

Used to print the paper jam, misfeed, and the trouble history. (If the number of misfeed or the 
troubles is considerably great, it is judged that repair is required.)

Adjustment/ Setting/ 
Operation data check

80

Used to print the paper transfer time list.

Paper feed, paper 
transport

Operation test/check

24

1

Used to clear the jam counter and the trouble counter. (After completion of maintenance, the 
counters are cleared.)

Data clear

2

Used to clear the counter value (print quantity) in each paper feed section.

Data clear

3

Used to clear the counter value of the finisher, DSPF, and the scan (reading).

Data clear

4

Used to clear the print counter value of the maintenance counter, the transfer, and the fusing web 
cleaning feed counter. (After completion of maintenance, the counters are cleared.)

Data clear

5

Used to clear the developer counter value. 
(After replacement of developer, the counter is cleared.)

Data clear

6

Used to clear the copy counter value.

Data clear

7

Used to clear the OPC drum counter value. 
(After replacement of the OPC drum, the counter is cleared.)

Data clear

9

Used to clear the printer mode print counter and the self print mode print counter.

Data clear

10

Used to clear the FAX counter value. (Only when the FAX is installed.)

Data clear

15

Clearing counters related to the network scanner

Data clear

30

Used to initialize the administrator password.

Data clear

31

Used to initialize the service mode password.

Data clear

25

1

Used to check the operation of the developing section.

Process 
(Developing section)

Operation test/check

2

Used to initialize the toner density when replacing developer. (Automatic adjustment)

Process 
(Developing section)

Setting

6

Used to adjust the sensitivity of the developer adjustment sensor and the toner density sensor.
(This setting is executed when developer together with the toner density sensor or developer 
together with the developing unit is replaced.) (Automatic adjustment)

Process 
(Developing section)

Setting

26

2

Used to set the  paper size of the tandem tray/large capacity paper feed tray (LCC). (When the 
paper size is changed, this simulation must be used to change the paper size on the software.)

Paper feed

Setting

3

Used to set the auditor specification mode. 
(Setting must be made according to the use conditions of the auditor.)

Auditor

Setting

5

Used to set the count mode of the total counter and the maintenance counter. (A3/11 x 17 size)

Setting

6

Used to set the specifications of each destination (paper, fixed magnification ratio, etc.)

Setting

10

Used to set the trial mode of the network scanner.

Setting

18

Used to set YES/NO of the toner save mode operation. (For Japan and UK versions.)

Setting

30

Used to set the CE mark support (Europe safety standards) operation mode. (Supporting slow 
start of the fusing heater lamp when driving it)

Setting

35

Used to set the display type of troubles in Sim. 22-4. When two or more same troubles occur 
continuously, the trouble history is displayed as one trouble or as two or more troubles occurring 
continuously.

Setting

38

Used to set whether printing is terminated or not when the developer life is reached or when the 
fuser web end.

Setting

41

Used to set YES/NO  of the magnification ratio auto select function (AMS) in the center binding 
mode.

Setting

49

Used to set the postcard copy speed mode.

Setting

50

Used to set Enable/Disable of black/white reverse function.

Setting