Read Sharp MX-M310 / MX-M310N (serv.man5) Service Manual online
MX-M260/M310/M260N/M310N MX-M260/M260N/M310/M310N (Main unit) 1 - 2
C. Transport
• When transporting the machine, use two people to lift the machine
using the two grips provided on each side of the machine.
D. Other precautions
• If the machine produces smoke or bad smell, stop the operation of
the machine.
• Do not use flammable spray near the machine.
• Do not remove the cabinet of the machine.
• Do not put a receptacle with water in it or metal pieces, which may
drop inside the machine, causing a trouble.
• When it thunders, turn off the power and disconnect the power plug
from the power outlet to prevent against an electric shock or a fire
caused by lighting damage.
caused by lighting damage.
• If a piece of metal or water enters the machine, turn off the power
and disconnect the power plug from the power outlet.
• Do not touch the power plug with a wet hand.
• Do not remodel the machine.
• Be careful not to pinch your fingers when closing the front cover or
the side cover and setting the paper feed tray to supply paper or pro-
cess a paper jam.
cess a paper jam.
• When disconnecting the power plug from the power outlet, do not
pull the cord.
• Do not throw toner or the toner cartridge into a fire.
• Keep toner or the toner cartridge away from the children.
• When the exclusive table (option) is used, be sure to use the adjust-
ers (4 pcs.) on the floor.
When it is required to move the machine for rearrangement of the
office, etc., release the adjuster locks and move the machine.
When it is required to move the machine for rearrangement of the
office, etc., release the adjuster locks and move the machine.
• The fusing section is heated to a high temperature.
When removing a paper jam, be careful not to touch the fusing sec-
tion.
tion.
• When the machine is not used for a long time, disconnect the power
plug from the power outlet for safety.
• When transporting the machine, turn off the power and disconnect
the power plug from the power outlet. (Remove the earth wire after
disconnecting the power plug from the power outlet.)
disconnecting the power plug from the power outlet.)
2. Removal of protective material and fixing
screw
1) Remove all tapes, then open the document cover and remove the
protective material of sheet shape.
2) Use a screwdriver to remove the fixing screw.
The fixing screw is required when transporting the machine. Keep
it in the tray. (Refer to the later description.)
it in the tray. (Refer to the later description.)
Adjuster
Lock
Release
Fusing section
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man5) service manuals if exist.