Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online
MX-265N MX-M266N/M316N/M265N/M315N/M356N/M265U/M315U/M356U (MAIN UNIT) 2 – 5
Loading paper and changing the paper size.
1)
Pull out the paper tray.
To load paper, go to step 3. To load a different size of paper, go
to the next step.Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of paper, go
to the next step.Gently pull the tray out until it stops.
2)
Adjust the guide plates A and B by squeezing their lock levers
and sliding them to match the vertical and horizontal dimen-
sions of the paper to be loaded.
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
and sliding them to match the vertical and horizontal dimen-
sions of the paper to be loaded.
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
3)
Fan the paper.
Fan the paper well before loading it. If the paper is not fanned,
multiple sheets may feed at once and cause a misfeed.
Fan the paper well before loading it. If the paper is not fanned,
multiple sheets may feed at once and cause a misfeed.
4)
Insert the paper into the tray.
Load the paper with the print side face up. The stack must not
be higher than the indicator line (maximum of 500 sheets).
Load the paper with the print side face up. The stack must not
be higher than the indicator line (maximum of 500 sheets).
5)
Gently push the paper tray into the machine.
Push the tray firmly all the way into the machine.
Push the tray firmly all the way into the machine.
If you loaded a different type or size of paper than was loaded
previously, be sure to change the "Paper Tray Settings" in the
system settings. If these settings are not configured correctly,
automatic paper selection will not operate correctly and print-
ing may take place on the wrong size or type of paper, or a
misfeed may occur.
previously, be sure to change the "Paper Tray Settings" in the
system settings. If these settings are not configured correctly,
automatic paper selection will not operate correctly and print-
ing may take place on the wrong size or type of paper, or a
misfeed may occur.
Partition A
Partition B
Indicator
line
line
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.