Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual online
MX-265N MX-M266N/M316N/M265N/M315N/M356N/M265U/M315U/M356U (MAIN UNIT) 2 – 4
11) Connect the harness of the developer to the machine.
B. Toner cartridge installation
"It is necessary to install the toner cartridge to start this simulation."
1)
Remove the new toner cartridge from the box. Grasp the car-
tridge on both sides and shake it horizontally four or five times.
tridge on both sides and shake it horizontally four or five times.
2)
Insert the toner cartridge along the guides until it locks in place
while pushing the lock release lever.
If there is any dirt or dust on the toner cartridge, remove it
before installing the cartridge.
while pushing the lock release lever.
If there is any dirt or dust on the toner cartridge, remove it
before installing the cartridge.
C. Set the toner density reference control level
1)
With the front cover open, turn ON the machine power and
enter SIM25-02.
enter SIM25-02.
When the machine is not in the simulation mode, if the front
cover is closed and the machine power is turned ON, toner
may be supplied from the toner cartridge to the developer car-
tridge. Under this state, the toner density reference control
level adjustment cannot be made properly.
Therefore, if the front cover is closed and the machine power is
turned ON with the machine not in the simulation mode, dis-
pose developer and supply new developer and adjust the toner
density reference level.
* It is necessary to install the toner cartridge to start this simu-
lation.
cover is closed and the machine power is turned ON, toner
may be supplied from the toner cartridge to the developer car-
tridge. Under this state, the toner density reference control
level adjustment cannot be made properly.
Therefore, if the front cover is closed and the machine power is
turned ON with the machine not in the simulation mode, dis-
pose developer and supply new developer and adjust the toner
density reference level.
* It is necessary to install the toner cartridge to start this simu-
lation.
2)
Close the front cabinet.
3)
Press [START] key, and execute SIM25-02.
Note: It takes about 3 minutes to execute SIM25-02 com-
pletely. During execution of this simulation, the front cover
must not be opened and the machine power must not be
turned OFF.
Note: It takes about 3 minutes to execute SIM25-02 com-
pletely. During execution of this simulation, the front cover
must not be opened and the machine power must not be
turned OFF.
D. Paper tray setup
System setting
1)
Touch the [Paper Select] key.
You can also touch the paper size display (A) to open the
paper tray settings.
paper tray settings.
2)
Select the tray that you want to use.
- Touch the key of the desired tray.
- Touch the [OK] key.
You will return to the base screen and the selected tray will be
highlighted.
- Touch the key of the desired tray.
- Touch the [OK] key.
You will return to the base screen and the selected tray will be
highlighted.
4 or 5 times
Special Modes
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
Original
Paper Select
Auto
A4
Plain
Auto
Exposure
Auto
A4
Preview
A3
3.
1.
2.
A4
A4R
B4
4.
Plain
A4
Plain
A3
3.
2. A4R
B4
4.
A4
A4
1.
Special Modes
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
Original
Paper Select
Auto
A4
Plain
Auto
Exposure
Auto
A4
Preview
A3
3.
1.
2.
A4
A4R
B4
4.
Plain
A4
Plain
A3
3.
2. A4R
B4
4.
A4
A4
1.
(A)
Paper Select
Paper Tray
Bypass Tray
OK
Plain
Plain
Plain
2. A4R
A4
3. B4
4. A3
1.
Plain
A4
Plain
(1)
(2)
2
: ‘15/Aug.
2
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.