MX-M266N, MX-M316N, MX-M356N (serv.man5). Installation Manual (Revised December 2016). - Sharp Copying Equipment Service Manual (repair manual). Page 11

  MX-M266N/M316N/M265N/M315N/M356N/M265U/M315U/M356U MX-M266N A/M316N A/M356N A/M265NE/M315NE(MAIN UNIT)  2 – 2

2)

Hold the paper pressure plate and turn the fixing screw in the
arrow direction

3)

Store the fixing pin and the fixing screw in the tray. 
Store the fixing screw which was removed in the above proce-
dure 2 and the fixing screw which was removed in procedure 2
of 2.  Removal of protective material and fixing screw in the
storage place in the tray.

1)

Remove the optical unit fixing screw, and remove the note
label.  
- Use a coin to remove the fixing screw.
- The fixing screw is required when transporting the machine.
Keep it in the tray. (Refer to the later description.)

NOTE: When an optional paper feed desk is connected to the

machine, unpack and install the paper feed desk, then
unpack the machine. Place the machine on the option desk
securely, and perform the installing procedures of the
machine.
Place the machine on the optional desk firmly and secure.

NOTE: Be careful not to leave fingerprints or oily dirt on the DV

roller surface.

1)

Open the bypass tray, and open the side cover.

2)

Open the front cover.

3)

Remove the screw fixing the developer cartridge and discon-
nect the harness of the developer.

4)

Remove the developer cartridge.

Screw

Fixing Screw

: ‘16/Sep.